| Product Identification | Back to Contents | 【Product Name】
Butyraldehyde oxime | 【Synonyms】
Butyraldehyde oxime | 【CAS】
110-69-0 | 【Formula】
C4H9NO | 【Molecular Weight】
87.14 | 【EINECS】
203-792-8 | 【RTECS】
ES3500000 | 【RTECS Class】
Tumorigen; Mutagen | 【Beilstein/Gmelin】
1698799 | 【Beilstein Reference】
4-01-00-03234 | 【EC Index Number】
616-013-00-5 | 【EC Class】
Toxic; Harmful; Irritant |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Colorless liquid. | 【Solubility in water】
Insoluble | 【Melting Point】
-29.5 | 【Boiling Point】
152 | 【Density】
0.906 g/cm3 (20 C) | 【Partition Coefficient】
.89 | 【Usage】
Used to make plastics and rubber. | 【Vapor Density】
3.01 | 【Refractive Index】
1.43358 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Inhalation】
Vapors may cause dizziness or suffocation. May cause irritation or burns. | 【Skin】
May cause irritation or burns. | 【Eyes】
See Skin. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | 【EC Risk Phrase】
R 22 24 36 | 【EC Safety Phrase】
S 23 36 45 | 【UN (DOT)】
2840 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Wear appropriate protective gloves, clothing and goggles. | 【Respirators】
Wear positive pressure self-contained breathing apparatus (SCBA). | 【Exposure Effects】
The toxological properties of this substance have not been fully investigated. | 【Poison Class】
3 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
57.8 (closed cup) | 【Fire Fighting】
Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use alcohol foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources. | 【Fire Potential】
HIGHLY FLAMMABLE. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors. |
| Stability and Reactivity | Back to Contents | 【Incompatibilities】
Incompatible with oxidizing materials Incompatible with metallic impurities May react with strong acids. | 【Stability】
No data. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
| Company Name: |
Alfa Aesar |
| Tel: |
400-6106006 |
| Fax: |
021-67582001/03/05 |
| WebSite: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical |
| Tel: |
021-021-58432009 400-005-6266 |
| Fax: |
021-58436166 |
| WebSite: |
http://www.energy-chemical.com |
| Company Name: |
China Langchem Inc. |
| Tel: |
0086-21-58956006 |
| Fax: |
0086-21-58956100 |
| WebSite: |
www.chemicalbook.com/ShowSupplierProductsList19141/0.htm |
| Company Name: |
Maya High Purity Chemicals |
| Tel: |
+86 (573) 82222445 (0)18006601000 452520369 |
| Fax: |
+86 (573) 82222643 |
| WebSite: |
www.chemicalbook.com/ShowSupplierProductsList15221/0.htm |
|