Identification | Back Directory | [Name]
Dipropionyl peroxide(in solution,content≤27%) | [CAS]
3248-28-0 | [Synonyms]
Propionyl peroxide. dipropionyl peroxide Bis(1-oxopropyl)peroxide Bis(1-oxopropyl) peroxide propanoyl propaneperoxoate Peroxide, bis(1-oxopropyl) peroxypropionic acid propionyl ester dipropionyl peroxide, <= 27% in solution Dipropionyl peroxide(in solution,content≤27%) | [EINECS(EC#)]
221-828-0 | [Molecular Formula]
C6H10O4 | [MOL File]
3248-28-0.mol | [Molecular Weight]
146.141 |
Chemical Properties | Back Directory | [Definition]
Avail-
able as a 25% solution in a high-boiling hydrocar-
bon, flash p 125F (51.6C).
| [Melting point ]
200 °C | [Boiling point ]
185.74°C (rough estimate) | [density ]
1.0945 (rough estimate) | [refractive index ]
1.4310 (estimate) | [Uses]
Initiator in polymerization reactions, such as
the high-pressure polymerization of ethylene. | [EPA Substance Registry System]
Peroxide, bis(1-oxopropyl) (3248-28-0) |
Safety Data | Back Directory | [RIDADR ]
3117 | [HazardClass ]
5.2 | [PackingGroup ]
II | [Safety Profile]
material explodes at
room temperature. When heated to
decomposition it emits acrid smoke and
fumes. See also PEROXIDES. |
Hazard Information | Back Directory | [General Description]
Available only as a 25% solution. Pure material poses a severe explosion hazard. Used as an initiator in polymerization reactions. | [Air & Water Reactions]
Highly flammable. May ignite spontaneously if exposed to air. | [Reactivity Profile]
Dipropionyl peroxide(in solution,content≤27%) is a good oxidizing agent. May cause ignition of organic compounds on contact . Reacts violently with strongly reduced material such as sulfides, nitrides, and hydrides. Many produce explosions or generate gases (toxic and nontoxic). Generally, dilute solutions (<70%) are safe, but the presence of a catalyst (often a transition metal such as cobalt, iron, manganese, nickel, or vanadium) as an impurity may even then cause rapid decomposition, a buildup of heat, and even an explosion. May become explosive when evaporated to dryness or near-dryness. May explode from heat, contamination or loss of temperature control. | [Hazard]
Strong oxidizing agent, may explode if
shocked or heated.
|
|
|