| Identification | Back Directory | [Name]
2-PHENYLETHYL ACRYLATE | [CAS]
3530-36-7 | [Synonyms]
PHENETHYL ACRYLATE 2-PHENYLETHYL ACRYLATE 2-phenylethyl prop-2-enoate Acrylic acid phenethyl ester 2-Phenylethyl acrylate,min. 92% acrylic acid 2-phenylethyl ester Propenoic acid 2-phenylethyl ester 2-Propenoic acid,2-phenylethyl ester | [EINECS(EC#)]
222-562-8 | [Molecular Formula]
C11H12O2 | [MDL Number]
MFCD00080620 | [MOL File]
3530-36-7.mol | [Molecular Weight]
176.21 |
| Questions And Answer | Back Directory | [Application]
2-Phenylacetic acrylate can be widely used in coatings, inks, adhesives and other fields, and the demand for this product will increase year by year in the future. |
| Hazard Information | Back Directory | [Uses]
2-Phenylethyl acrylate (PEA) is used in specialty coatings, adhesives and optical applications[4]. It serves as a monomer for free radical copolymerization and radical cotelomerization with acrylic acid. It is also homogenized with photoinitiators to prepare photopolymerizable formulations[2-5]. For example: 2-Phenylethyl acrylate serves as a comonomer in free radical polymerization with methyl acrylate or N-vinyl pyrrolidone, and with 2-phenylethyl methacrylate in solution, yielding copolymers evaluated as pressure-sensitive adhesives on leather and as foldable soft intraocular lens materials[1][3]. Radical cotelomerization of 2-phenylethyl acrylate with acrylic acid in the presence of 2-aminoethanethiol hydrochloride gives cotelomers such as 1.6PeA-3.0AA in 26–60% yield, which lower interfacial tension and form stable oil-in-water emulsions with toluene[5]. | [Synthesis]
Synthesis of 2-Phenylethyl Acrylate (PEA): Into a three necked 250 ml round bottomflask equippedwith
mechanical stirrer, dropping funnel and guard tube, 12.2 ml
(0.1 mol) of 2-Phenylethyl alcohol in 50 ml of ethyl methyl
ketone (EMK)was taken. 10.1 ml (0.1 mol) of triethylamine
was added into the flask and the temperature of the content
were maintained at 0–5℃ with constant stirring. 9.0 ml
(0.1 mol) of acryloyl chloride in 20 ml of EMK was taken in a dropping funnel and slowly added into the flask. After the addition was completed, the reaction mixture was kept stirring at the same temperature for 1 hour and at room temperature for another 1 hour. The triethylammonium chloride salt, which precipitated out during the reaction was filtered and discarded. The filtrate was washed with 5% NaOH solution, dried with anhydrous ammonium sulphate. The solvent in the filtrate was evaporated and a liquid monomer (PEA) was obtained[1]. | [References]
[1]
Senthilkumar, U., Ganesan, K., Reddy, B. S. R. (2003). Synthesis, Characterization and Reactivity Ratios of Phenylethyl Acrylate/Methacrylate Copolymers. Journal of Polymer Research, 10(1), 21–29. https://doi.org/10.1023/a:1023938301946 [2]
Ghorpade, R. V., Bhosle, S. M., Ponrathnam, S., Rajan, C. R., Chavan, N. N., Harikrishna, R. (2012). Photopolymerization kinetics of 2-phenylethyl (meth)acrylates studied by photo DSC. Journal of Polymer Research, 19(2). https://doi.org/10.1007/s10965-011-9811-3 [3]
Lee, H., Tae, G., Kim, Y. H. (2008). A study on the copolymerization kinetics of phenylethyl acrylate and phenylethyl methacrylate. Macromolecular Research, 16(7), 614–619. https://doi.org/10.1007/bf03218569 [4]
Mulani, K., Ghorpade, R., Ponrathnam, S., Chavan, N., Donde, K. (2018). Non-isothermal Kinetics of Free Radical Polymerization of 2-Phenylethyl (Meth)acrylate. Journal of Chemistry and Chemical Sciences, 8(3), 585–594. https://doi.org/10.29055/jccs/643 [5]
YOSHIMURA, T., HONTAKE, K., SHOSENJI, H., ESUMI, K. (2001). Preparation and Surface Activities of Cotelomers of Acrylic Acid and n-Octyl, 2-Ethylhexyl or 2-Phenylethyl Acrylate. Journal of Oleo Science, 50(2), 103–108. https://doi.org/10.5650/jos.50.103 |
|
| Company Name: |
Aemon Chemical
|
| Telephone: |
0086-755-86198205 |
| Website: |
www.aemonchem.com |
| Company Name: |
Rhawn Reagent
|
| Telephone: |
400-400-1332688 18019345275 |
| Website: |
http://www.rhawn.cn |
|