| Identification | Back Directory | [Name]
Dibasic Lead Stearate | [CAS]
56189-09-4 | [Synonyms]
Dbl
MCF2
Listab 51
Einecs 260-043-8
Proto-oncogene DBL
Dibasic Lead Stearate
dioxobis(stearato)dilead
di basic lead octadecanoate
lead stearate, dibasic salt
di basic lead stearate, DBLS
bis(octadecanoato)dioxodi-Lead
Lead, bis(octadecanoato)dioxodi-
Dibasic Lead Stearate ISO 9001：2015 REACH
1,2-Bis(octadecanoyloxy)-1,2-dioxodiplumbane
ANTI-MCF2 (C-TERM) antibody produced in rabbit | [EINECS(EC#)]
260-043-8 | [Molecular Formula]
C36H70O6Pb2 | [Molecular Weight]
1013.35 |
| Hazard Information | Back Directory | [Chemical Properties]
Lead stearate is an organic lead compound.
It is a white powder with a slight fatty odor. | [Potential Exposure]
It is used as a stabilizer for plastics
and rubber processing; in extreme-pressure lubricants and
as a drier in varnishes | [First aid]
Move victim to fresh air. Call 911 or emergency
medical service. Give artificial respiration if victim is not
breathing. Do not use mouth-to-mouth method if victim
ingested or inhaled the substance; give artificial respiration
with the aid of a pocket mask equipped with a one-way
valve or other proper respiratory medical device. Administer
oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance,
immediately flush skin or eyes with running water for at
least 20 minutes. For minor skin contact, avoid spreading
material on unaffected skin. Keep victim warm and quiet.
Effects of exposure (inhalation, ingestion or skin contact) to
substance may be delayed. Ensure that medical personnel
are aware of the material(s) involved and take precautions to
protect themselves. Medical observation is recommended for
24 to 48 hours after breathing overexposure, as pulmonary
edema may be delayed. As first aid for pulmonary edema, a
doctor or authorized paramedic may consider administering
a drug or other inhalation therapy. | [Shipping]
UN2811 Toxic solids, organic, n.o.s., Hazard
Class: 6.1; Labels: 6.1-Poisonous materials, Technical
Name Required | [Incompatibilities]
Dust may form explosive mixture with
air; keep away from high heat and sources of ignition.
Incompatible with oxidizers (chlorates, nitrates, peroxides,
permanganates, perchlorates, chlorine, bromine, fluorine,
etc.); contact may cause fires or explosions. Keep away
from alkaline materials, strong bases, strong acids, oxoacids, and epoxides | [Uses]
It is used as a stabilizer, lubricant, and smoothing agent and transparent softener for rubber products. This product is a polyvinyl chloride (PVC) stabilizer. Dibasic lead stearate has better thermal stability, electrical insulation, and water resistance than lead stearate. It is commonly used in extruded products such as pipes, corrugated sheets, and wires, and also in injection molded products. Lead stabilizers are the earliest stabilizers used in PVC and are still widely used. The usage accounts for about 60% of all stabilizer dosages (excluding lead soaps). |
|
| Company Name: |
Hubei Dechao Chemical Co., Ltd.
|
| Telephone: |
027-87290866 18071515590;18062685590; |
| Website: |
www.chemicalbook.com/ShowSupplierProductsList30988/0_EN.htm |
|