| Identification | Back Directory | [Name]
ACRYLONITRILE/BUTADIENE COPOLYMER | [CAS]
9003-18-3 | [Synonyms]
CeMedine 540
Medium W.Wt.
Butadiene Copolymer
NR, carbon blackfilled
butadiene-acrylonitrile
NBR, carbon black filled
Average mooney viscosity 62
POLY(BUTADIENE/ACRYLONITRILE)
Acrylonitrile-butadienepolymer
Butadieneacrylonitrilerubber170
butadiene-acrylonitrilecopolymer
POLY(ACRYLONITRILE-CO-BUTADIENE)
ACRYLONITRILE/BUTADIENE COPOLYMER
Nitrile rubber, carbon black filled
Acrylonitrile-1,3-butadiene copolymer
POLY(ACRYLONITRILE-CO-BUTADIENE) 30-35&
POLY(ACRYLONITRILE-CO-BUTADIENE) 19-22&
Acrylonitrile/Butadiene copolymer (33/67)
2-Propenenitrile,polymerwith1,3-butadiene
POLY(BUTADIENE/ACRYLONITRILE), AMINE TERMINATED
POLY(BUTADIENE-CO-ACRYLONITRILE), DICARBOXY TERMINATED
Poly(1,3-butadiene-co-acrylonitrile), Carbon black
filled
Poly(acrylonitrile-co-butadiene) acrylonitrile 37-39 wt. %
POLY(ACRYLONITRILE-CO-BUTADIENE), 37-39 WT. % ACRYLONITRILE | [EINECS(EC#)]
231-675-1 | [Molecular Formula]
C7H9N | [MDL Number]
MFCD00133994 | [MOL File]
9003-18-3.mol | [Molecular Weight]
107.16 |
| Hazard Information | Back Directory | [Chemical Properties]
NBR is important for its high oil and temperature resistance.
Flexibility at very low temperatures is obtained with lower
acrylonitrile content: in turn, this sacrifices some oil resistance.
Low-temperature flexibility for some applications can
be modified by plasticizers or blends. Additional properties
include resistance to heat, abrasion, and water, as well as
resistance to gas permeation. NBR is frequently plasticized
with organic phosphate, phthalic ester, or dibenzyl ether. | [Uses]
Applications include fuel lines,
hoses, automobile parts, structural adhesives, oil-resistant
clothing or articles, gloves, and shoe soles and heels.
Gloves made of nitrile rubber are comparable to neoprene
gloves in their resistance to organic solvents; nitrile rubber
gloves were superior in resistance to II-hexane and inferior in
resistance to phenol. NBR is used for hoses, gaskets, and
protective clothing.
| [Production Methods]
NBR is produced by polymerization of acrylonitrile and
butadiene in varying proportions. The basic steps are the
emulsion polymerization techniques used for styrene–
butadiene. The process yields both “hot” and “cold” rubber.
Hot rubbers are branched and contain some cross-linked gel.
The more linear cold rubbers are slightly cross-linked by
incorporating divinyl benzene to improve processability and
compression set resistance. |
|
|