| Identification | Back Directory | [Name]
O,O'-Bis(2-aminopropyl)polypropyleneglycol | [CAS]
9046-10-0 | [Synonyms]
ts64
popda
d2000
O,O'
hanediyl))
jeffamine400
thylethoxy)-
jeffamined230
jeffamined400
jeffamined600
jeffamine2000
jeffamined1000
jeffamined2000
ARADUR 3405 BD
polyetheraMine
jeffamineta345
jeffamined4000
jeffamined3000
O,O'-Bis(2-amino
etherdiaminemg420
JEFFAMINE D-230(R)
JEFFAMINE D-400(R)
POLYETHERAMINE D 230
POLYETHERAMINE D 400
ablebond342-1hardener
POLYETHERAMINE D 2000
PolyoxyalkyleneaMines
Polyether Amine (PEA)
PolyetheraMine AMD-2000
-Dipropanal Ganciclovir
poly(oxypropylene)diamine
N-Tripropanal Ganciclovir
diaminopolypropyleneglycol
-Di-2-pyridyl Thiocarbonate
Polyetheramine D2000 (Baxxodur)
-Diethyl Methylphosphonothioate
amino-teminated polyoxypropylene
-Bis(5-bromopyrimidin-2-yl)glycol
)-tert-Butyldimethylsilyl) Ezetimibe
-Bis(2-aminoethyl)hexaethylene glycol
-Bis(2-aminopropyl)polypropyleneglycol
alpha,omega-diaminopolypropyleneglycol
polypropyleneglycolbis(aminopropyl)ether
POLY(PROPYLENE OXIDE), DIAMINE TERMINATED
)-tert-Butyldimethylsilyl) Seco-ezetimibe
-Di-p-toluoyl-D-tartaric acid 99+% (HPLC)
O,O'-BIS(2-AMINOPROPYL)POLYPROPYLENEGLYCOL
Polypropylenglycol-bis-(2-aminopropylether)
-Di-p-toluoyl-L-tartaric acid 99+.9% (HPLC)
o,o’-bis(2-aminopropyl)polypropyleneglycol130
-Bis(2-aminoethyl)polyethylene glycol 20,000MW
O,O'-Bis(2-aMinopropyl)polypropyleneglycol D230
O,O'-BIS(2-AMINOPROPYL)POLYPROPYLENE GLYCOL 300
POLY(PROPYLENE GLYCOL) BIS(2-AMINOPROPYL ETHER)
POLYPROPYLENE GLYCOL 300 BIS(2-AMINOPROPYL ETHER)
POLYPROPYLENE GLYCOL 130 BIS(2-AMINOPROPYL ETHER)
Polyoxyalkyleneamine: (Poly(oxypropylene)diamine)
Polypropylene oxide,diamine terminated,mw 2000(248cs)
O,O'-Bis(2-aminopropyl)polypropyleneglycol ISO 9001：2015 REACH
-Bis[2-(N-Succinimidyl-succinylamino)ethyl]polyethylene glycol
Poly(propylene glycol) bis(2-aMinopropyl ether),average Mn ~230
Poly(propylene glycol) bis(2-aMinopropyl ether),average Mn ~400
Poly(propylene glycol) bis(2-aMinopropyl ether),average Mn ~2000
Poly(propylene glycol) bis(2-aMinopropyl ether),average Mn ~4000
POLY(PROPYLENE GLYCOL) BIS(2-AMINOPROPYL ETHER), AVERAGE MN CA. 230
POLY(PROPYLENE GLYCOL) BIS(2-AMINOPROPYL ETHER), AVERAGE MN CA. 400
POLY(PROPYLENE GLYCOL) BIS(2-AMINOPROPYL ETHER), AVERAGE MN CA. 4,000
POLY(PROPYLENE GLYCOL) BIS(2-AMINOPROPYL ETHER), AVERAGE MN CA. 2,000
alpha-(2-aminomethylethyl)-omega-(2-aminomethylethoxy)poly(oxy(methyl-1,2-et
poly(oxy(methyl-1,2-ethanediyl)),alpha-(2-aminomethylethyl)-omega-(2-aminometh
Jeffamine(R) D-400(R), Polypropylene glycol 130 bis(2-aminopropyl ether)
Jeffamine(R) D-230(R), Polypropylene glycol 130 bis(2-aminopropyl ether)
Poly[oxy(Methyl-1,2-ethanediyl)], α-(2-aMinoMethylethyl)-ω-(2-aMinoMethylethoxy)-
Polyoxy(methyl-1,2-ethanediyl), .alpha.-(2-aminomethylethyl)-.omega.-(2-aminomethylethoxy)-
2-ethanediyl)],.alpha.-(2-aminomethylethyl)-.omega.-(2-aminomethylethoxy)-Poly[oxy(methyl-1
Poly(oxy(methyl-1,2-ethanediyl)), alpha-(2-aminomethylethyl)-omega-(2-aminomethylethoxy) molare Masse 230 g/mol
Poly(oxy(methyl-1,2-ethanediyl)), alpha-(2-aminomethylethyl)-omega-(2-aminomethylethoxy) molare Masse >400 g/mol | [EINECS(EC#)]
817-485-7 | [Molecular Formula]
CH3CH(NH2)CH2[OCH2CH(CH3)]nNH2 | [MDL Number]
MFCD00082259 |
| Hazard Information | Back Directory | [Description]
Amine-TerminatedPolyether (ATPE) is a class of polyolefin compounds with a soft polyether backbone, capped by primary or secondary amine groups. Because the main chain of the molecule is a soft polyether chain, and the hydrogen on the terminal of polyether amine is more active than the hydrogen on the terminal hydroxyl group of polyether, therefore, polyether amine can be a good substitute for polyether in some material processes, and can improve the application performance of new materials. They are widely used in polyurethane reactive injection molding materials, polyurea spraying, epoxy resin curing agents and gasoline scavengers. | [Chemical Properties]
Poly(propylene glycol) bis(2-aminopropyl ether) is a light yellow or colorless transparent liquid at room temperature, with the advantages of low viscosity, low vapor pressure and high primary amine content, and is soluble in solvents such as ethanol, aliphatic hydrocarbons, aromatic hydrocarbons, esters, glycol ethers, ketones and water. | [Uses]
Poly(propylene glycol) bis(2-aminopropyl ether) have good alkali and water resistance and moderate acid resistance. Epoxy resins cured with polyetheramines have good electrical properties. Polyetheramines have unique properties and are used in almost all epoxy applications such as coatings, potting materials, construction materials, composites and adhesives. | [Application]
Poly(propylene glycol) bis(2-aminopropyl ether) can be used in adhesives, coatings, and composite materials. It enhances elasticity and impact resistance. Besides, it functions as a linker in drug delivery and hydrogel formulations. | [Preparation]
synthesis of Poly(propylene glycol) bis(2-aminopropyl ether): Firstly, the polyether is attached to the acetoacetate group at both ends by dienone or through the ester exchange reaction of ethyl acetoacetate with polyether polyol, and then the polyether capped by the acetoacetate group is aminated with a mono-primary amine, alkyl alcohol amine or dibasic primary amine to obtain an imine compound with a low viscosity with an aminobutyrate end group. | [Flammability and Explosibility]
Notclassified | [Solubility in organics]
THF, water |
|
| Company Name: |
Wuhan Biet Co., Ltd. Gold
|
| Telephone: |
027-83698488 15271884849 |
| Website: |
www.biet.com.cn/index_zh.html |
|