Trichromdicarbid
|
|
|
- CAS-Nr.
- 12012-35-0
- Bezeichnung:
- Trichromdicarbid
- Englisch Name:
- Chromium carbide
- Synonyma:
- CR3C2 300;CR3C2 160;Chrome carbide;CHROMIC CARBIDE;Chromium carbon;Cromium carbide;CHROMIUM CARBIDE;chromium(II) carbide;CHROMIUM (IC) CARBIDE;trichromium dicarbide
- CBNumber:
- CB4465148
- Summenformel:
- C2Cr3
- Molgewicht:
- 180.01
- MOL-Datei:
- 12012-35-0.mol
|
Trichromdicarbid Eigenschaften
- Schmelzpunkt:
- 1890°C
- Siedepunkt:
- 3800°C
- Dichte
- 6.68 g/mL at 25 °C (lit.)
- Aggregatzustand
- Powder
- Wichte
- 6.68
- Farbe
- gray
- Widerstand (resistivity)
- 75.0 (ρ/μΩ.cm)
- Wasserlöslichkeit
- Insoluble in water.
- Crystal Structure
- Orthorhombic
- Stabilität:
- Corroded by molten metals Ni, Zn, Cu, Cd, Al, Mn, and Fe. Corrosion resistant in molten Sn and Bi.
- InChIKey
- UFGZSIPAQKLCGR-UHFFFAOYSA-N
- EPA chemische Informationen
- Chromium carbide (Cr3C2) (12012-35-0)
Sicherheit
- Risiko- und Sicherheitserklärung
- Gefahreninformationscode (GHS)
| RIDADR |
UN3178 |
|
|
| WGK Germany |
3 |
|
|
| TSCA |
Yes |
|
|
| HazardClass |
4.1 |
|
|
| PackingGroup |
III |
|
|
| Bildanzeige (GHS) |
|
| Alarmwort |
|
| Gefahrenhinweise |
| Code |
Gefahrenhinweise |
Gefahrenklasse |
Abteilung |
Alarmwort |
Symbol |
P-Code |
| H228 |
Entzündbarer Feststoff. |
Entzündbare Feststoffe |
Kategorie 1 |
Achtung
Warnung |
![GHS hazard pictograms]() src="/GHS02.jpg" width="20" height="20" /> |
P210, P240,P241, P280, P370+P378 |
|
| Sicherheit |
| P210 |
Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen. |
| P240 |
Behälter und zu befüllende Anlage erden. |
| P241 |
Explosionsgeschützte [elektrische/Lüftungs-/ Beleuchtungs-/...] Geräte verwenden. |
| P280 |
Schutzhandschuhe/Schutzkleidung/Augenschutz tragen. |
|
Trichromdicarbid Chemische Eigenschaften,Einsatz,Produktion Methoden
Chemische Eigenschaften
Orthorhombic crystals.
Highest oxidation resistance at high temperature of
all metal carbides also resistant to acids and alkalies.
Verwenden
Chromium carbide (Cr3C2) ceramics has proved to be a potentially useful material because of its excellent electrocal conductivity, high degree of hardness,moderate melting point, and good chemical stability.
Chromium carbides are hard and their general use is to provide hard wear-resistant coatings on parts that need to be protected. When combined with a protective metal matrix, corrosion-resistant as well as wear-resistant coatings can be developed that are easy to apply and cost effective. These coatings are applied by either welding or thermal spray. When combined with other carbides, chromium carbide can be used to form cutting tools.
Chromium carbide welding electrodes are increasingly used instead of the earlier ferrochrome/carbon-containing electrodes, as they give superior and more consistent results. In ferrochrome/carbon-containing welding electrodes, chromium carbide is created during the welding process to provide a hard wear resistant layer. However, the formation of the carbides is determined by the precise conditions in the weld and therefore there can be variation between welds which is not seen with electrodes containing chromium carbide. This is reflected in the wear resistance of the weld deposit. Using the dry sand rubber wheel test, wear rates of welds deposited from ferrochrome/carbon electrodes have been found to be up to 250% greater compared to chromium carbide.
Trichromdicarbid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
Trichromdicarbid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.
Global( 128)Lieferanten
12012-35-0(Trichromdicarbid)Verwandte Suche:
- chromiumcarbide(cr3c2)
- CR3C2 160
- CR3C2 300
- CHROMIUM CARBIDE
- CHROMIC CARBIDE
- CHROMIUM (IC) CARBIDE
- Chromiumcarbidegraypowder
- trichromium dicarbide
- CR3C2 160 CHROMIUM CARBIDE, GRADE 160 - A PRODUCT OF H.C. STARCK
- CR3C2 300 CHROMIUM CARBIDE, GRADE 300 - A PRODUCT OF H.C. STARCK
- Chrome carbide
- CHROMIUM CARBIDE, -325 MESH
- Chromiumcarbide,99.5%(metalsbasis)
- Chromiumcarbide,99.7%
- Chromium carbide powder (CrC)
- Chromium carbon
- Cromium carbide
- Chromium carbide, min. 97.5%
- Cr3C2)Chromium carbide
- Chromium carbide powder (Cr3C2)
- Chromium carbide nanopowder, APS <100 nm, 99.9%
- Chromium carbide powder (Cr3C2) 1 μm
- Chromium carbide nanopowder, APS <100 nm
- methanidylidynechromium
- chromium(II) carbide
- 12012-35-0
- 12070-40-0
- Cr3C2
- C2Cr3
- Cr2C3
- metal borides and carbides
- Inorganics
- Carbides
- Ceramics
- Metal and Ceramic Science
