α- Erythroidine

α- Erythroidine Struktur
466-80-8
CAS-Nr.
466-80-8
Englisch Name:
α- Erythroidine
Synonyma:
a-Erythroidine;1,2,6,7-Tetradehydro-12,17-dihydro-3β-methoxy-16(15H)-oxaerythrinan-15-one;1H,12H-Benzo[i]pyrano[3,4-g]indolizin-12-one, 2,6,8,9,9a,10-hexahydro-2-methoxy-, (2R,9aS,13bS)-
CBNumber:
CB81470765
Summenformel:
C16H19NO3
Molgewicht:
273.33
MOL-Datei:
466-80-8.mol

α- Erythroidine Eigenschaften

Schmelzpunkt:
58-60°
alpha 
D27 +136° (c = 0.5 in water)
Sicherheit
  • Risiko- und Sicherheitserklärung
  • Gefahreninformationscode (GHS)
Bildanzeige (GHS) GHS hazard pictograms
Alarmwort Warnung
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code
H315 Verursacht Hautreizungen. Hautreizung Kategorie 2 Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" /> P264, P280, P302+P352, P321,P332+P313, P362
H319 Verursacht schwere Augenreizung. Schwere Augenreizung Kategorie 2 Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" /> P264, P280, P305+P351+P338,P337+P313P
H335 Kann die Atemwege reizen. Spezifische Zielorgan-Toxizität (einmalige Exposition) Kategorie 3 (Atemwegsreizung) Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" />
Sicherheit
P264 Nach Gebrauch gründlich waschen.
P264 Nach Gebrauch gründlich waschen.
P280 Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.
P302+P352 BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P321 Besondere Behandlung
P332+P313 Bei Hautreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P362 Kontaminierte Kleidung ausziehen und vor erneutem Tragen waschen.

α- Erythroidine Chemische Eigenschaften,Einsatz,Produktion Methoden

läuterung methode

Recrystallise -erythroidine from pentane. It is best prepared freshly from the more stable hydrochloride. The hydrochloride (1.3g) in H2O (20mL) is basified with NaHCO3 to pH ~8 and extracted with *C6H6 (6 x 10mL). The combined extracts are evaporated to a small volume and refrigerated. The free base separates as white hygroscopic crystals m 52-55o, which are recrystallised from pentane. Although stable in solution, the crystals turn brown on exposure to air. -Erythroidine hydrochloride is best purified by dissolving 10g in H2O (100mL), adjusting the pH to 8 with aqueous NaHCO3, extracting with *C6H6 (4 x 20mL), evaporating to 20mL, passing through activated Al2O3 and eluting with *C6H6. The eluate is evaporated to a small volume and the crystals are collected, dissolved in EtOH and dry HCl gas passed through to give the pure hydrochloride. When recrystallised from EtOH, it has m 226-228o(dec), and [ ] D 32 +118o (c 0.5, H2O). It has max 224nm ( 35,500); compare with -erythroidine hydrochloride below. [Boelkeleide & Grundon J Am Chem Soc 75 2563 1953, Boekeleide & Morrison J Am Chem Soc 80 3905 1958, abs config: Hill & Shearer J Org Chem 2 7 3342 1955, Beilstein 27 III/IV 3569.]

α- Erythroidine Upstream-Materialien And Downstream Produkte

Upstream-Materialien

Downstream Produkte


α- Erythroidine Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global( 0)Lieferanten
Firmenname Telefon E-Mail Land Produktkatalog Edge Rate

  • 1,2,6,7-Tetradehydro-12,17-dihydro-3β-methoxy-16(15H)-oxaerythrinan-15-one
  • a-Erythroidine
  • 1H,12H-Benzo[i]pyrano[3,4-g]indolizin-12-one, 2,6,8,9,9a,10-hexahydro-2-methoxy-, (2R,9aS,13bS)-
  • 466-80-8
Copyright 2019 © ChemicalBook. All rights reserved