ABS Resins

ABS Resins Struktur
9003-56-9
CAS-Nr.
9003-56-9
Englisch Name:
ABS Resins
Synonyma:
abs;Acrylonitrile-butadiene-styrene;ACRYLONITRILE-BUTADIENE-STYRENE RESIN;acrylonitrile-butadiene-styrenecopolymers;ACRYLONITRILE-BUTADIENE-STYRENE COPOLYMER;KRYLENE;ABS rod;absresin;absresins;ABSPOLYMER
CBNumber:
CB8405764
Summenformel:
C45H51N3X2
Molgewicht:
633.91
MOL-Datei:
9003-56-9.mol

ABS Resins Eigenschaften

Schmelzpunkt:
58.54(±0.5)℃
Dichte
1.05 g/mL at 25 °C
Löslichkeit
acetone, MEK and DMF: soluble
Aggregatzustand
powder
Farbe
natural
SMILES
C(C/C=C/CC(C#N)CCC(C/C=C/CC(C*)C#N)C1=CC=CC=C1)(CCC(C#N)C/C=C/CC(C*)C1C=CC=CC=1)C1=CC=CC=C1 |$;;;;;;;;;;;;;;;;;*;;;;;;;;;;;;;;;;;;;;*;;;;;;;;;;;;$|
EPA chemische Informationen
Acrylonitrile 1,3-butadiene styrene polymer (9003-56-9)
Sicherheit
  • Risiko- und Sicherheitserklärung
  • Gefahreninformationscode (GHS)
Kennzeichnung gefährlicher Xn
R-Sätze: 22-36/37/38-20/21/22
S-Sätze: 26-36
RIDADR  UN 2215 8 / PGIII
WGK Germany  3
RTECS-Nr. AT6970000
Giftige Stoffe Daten 9003-56-9(Hazardous Substances Data)
Bildanzeige (GHS) GHS hazard pictograms
Alarmwort Warnung
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code
H302 Gesundheitsschädlich bei Verschlucken. Akute Toxizität oral Kategorie 4 Warnung P264, P270, P301+P312, P330, P501
H315 Verursacht Hautreizungen. Hautreizung Kategorie 2 Warnung P264, P280, P302+P352, P321,P332+P313, P362
H319 Verursacht schwere Augenreizung. Schwere Augenreizung Kategorie 2 Warnung P264, P280, P305+P351+P338,P337+P313P
H335 Kann die Atemwege reizen. Spezifische Zielorgan-Toxizität (einmalige Exposition) Kategorie 3 (Atemwegsreizung) Warnung
Sicherheit
P264 Nach Gebrauch gründlich waschen.
P264 Nach Gebrauch gründlich waschen.
P270 Bei Gebrauch nicht essen, trinken oder rauchen.
P280 Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.
P301+P312 BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.
P302+P352 BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P321 Besondere Behandlung
P330 Mund ausspülen.
P332+P313 Bei Hautreizung: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P501 Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

ABS Resins Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:

R22:Gesundheitsschädlich beim Verschlucken.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.

S-Sätze Betriebsanweisung:

S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

Chemische Eigenschaften

white to off-white powder

Verwenden

Typical Applications Include:

  • Semi-con: HDD Components; Wafer Handling; Jigs;Casings; & Connectors
  • Industiral: Converying;Metering; and Sensing applications

Vorbereitung Methode

acrylonitrile-butadiene-styrene resins are commonly referred to as ABS resins. These materials are thermoplastic resins that are produced by grafting styrene and acrylonitrile onto a diene-rubber backbone. The usually preferred substrate is polybutadiene because of its low glasstransition temperature (just above ?80 °C). Where ABS resin is prepared by suspension or mass polymerization methods, stereospecific diene rubber made by solution polymerization is the preferred diene. Otherwise the diene used normally is a high-gel or cross-linked latex made by a “hot-emulsion” process.

Allgemeine Beschreibung

3DXTech? ABS is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.

Advantages

ABS Resins is a strong and durable polymer. It is a chemically resistant resin. It gets easily attacked by polar solvents. It offers greater impact properties and slightly higher heat distortion temperature than HIPS.
It has a low melting temperature making it suitable for processing by 3D printing on an FDM machine.
ABS shows excellent mechanical properties. It is hard and tough in nature and thus delivers good impact strength. It offers a high degree of surface quality. Apart from these characteristics, Acrylonitrile Butadiene Styrene exhibits good electrical insulating properties.
It is an ideal material of choice for various structural applications. This is because of its several physical properties such as:
High rigidity, good weldability, and insulating properties; Good impact resistance, even at low temperatures; Good abrasion and strain resistance; High dimensional stability (Mechanically strong and stable over time); High surface brightness and excellent surface aspect

ABS Resins Upstream-Materialien And Downstream Produkte

Upstream-Materialien

Downstream Produkte


ABS Resins Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global( 109)Lieferanten
Firmenname Telefon E-Mail Land Produktkatalog Edge Rate
Zhengzhou Alfa Chemical Co.,Ltd
+8618530059196
sale04@alfachem.cn China 12333 58
Henan Tianfu Chemical Co.,Ltd.
+86-0371-55170693 +86-19937530512
info@tianfuchem.com China 21700 55
Hubei xin bonus chemical co. LTD
86-13657291602
linda@hubeijusheng.com CHINA 22968 58
Chongqing Chemdad Co., Ltd
+86-023-61398051 +8613650506873
sales@chemdad.com China 39916 58
career henan chemical co
+86-0371-86658258 15093356674;
factory@coreychem.com China 29826 58
Shaanxi Dideu Medichem Co. Ltd
+86-029-81138252 +86-18789408387
1057@dideu.com China 3979 58
Hefei TNJ Chemical Industry Co.,Ltd.
0551-65418671
sales@tnjchem.com China 34572 58
ANHUI WITOP BIOTECH CO., LTD
+8615255079626
eric@witopchemical.com China 23556 58
Dideu Industries Group Limited
+86-29-89586680 +86-15129568250
1026@dideu.com China 29831 58
Dayang Chem (Hangzhou) Co.,Ltd.
571-88938639 +8617705817739
info@dycnchem.com CHINA 52867 58

9003-56-9()Verwandte Suche:


  • abscopolymer
  • absresin
  • absresins
  • acrylonitrile,polymerwith1,3-butadieneandstyrene
  • 3DXMAX(TM) CFR-ABS carbon fiber reinforced ABS 3D printing filament black, diam. 1.75 mm
  • 3DXMAX(TM) CFR-ABS carbon fiber reinforced ABS 3D printing filament black, diam. 2.85 mm
  • 3DXNANO(TM) ESD CNT-ABS carbon nanotube reinforced ABS 3D printing filament black, diam. 1.75 mm
  • 3DXNANO(TM) ESD CNT-ABS carbon nanotube reinforced ABS 3D printing filament black, diam. 2.85 mm
  • ABS 3D printing filament black, diam. 1.75 mm
  • ABS 3D printing filament black, diam. 2.85 mm
  • ABS 3D printing filament blue, diam. 1.75 mm
  • ABS 3D printing filament blue, diam. 2.85 mm
  • ABS 3D printing filament green, diam. 1.75 mm
  • ABS 3D printing filament green, diam. 2.85 mm
  • ABS 3D printing filament natural, diam. 1.75 mm
  • ABS 3D printing filament natural, diam. 2.85 mm
  • ABS 3D printing filament orange, diam. 1.75 mm
  • ABS 3D printing filament orange, diam. 2.85 mm
  • ABS 3D printing filament red, diam. 1.75 mm
  • ABS 3D printing filament red, diam. 2.85 mm
  • ABS 3D printing filament white, diam. 1.75 mm
  • ABS 3D printing filament white, diam. 2.85 mm
  • ABS 3D printing filament yellow, diam. 1.75 mm
  • ABS 3D printing filament yellow, diam. 2.85 mm
  • iON(TM)nylon/ABS alloy 3D printing filament black, diam. 1.75 mm
  • iON(TM)nylon/ABS alloy 3D printing filament blue, diam. 1.75 mm
  • iON(TM)nylon/ABS alloy 3D printing filament natural, diam. 1.75 mm
  • iON(TM)nylon/ABS alloy 3D printing filament red, diam. 1.75 mm
  • 2-propenenitrile,polymerwith1,3-butadieneandethenylbenzene
  • Acrylonitrile-butadiene-styreneterpolymer
  • Propenenitrile,polymerwith1,3-butadieneandethenylbenzene
  • POLY(ACRYLONITRILE-CO-BUTADIENE-CO-STYRENE)
  • POLY(ACRYLONITRILE/BUTADIENE/STYRENE)
  • POLY(ACRYLONITRILE-CO-BUTADIENE-CO- &
  • POLY(ACRYLONITRILE-CO-BUTADIENE-CO-STYRE NE), MELT INDEX 6-8
  • POLY(ACRYLONITRILE-CO-BUTADIENE-CO-STYRE NE), MELT INDEX 1-3
  • KRYLENE
  • styrene/ butadiene/ acrylonitrile copolymer
  • Engineering plastic products
  • ACRYLONITRILE BUTADIENE-STYRENE (ABS)
  • Acrylonitrile-butadiene-styrene resins
  • STYRENE-BUTADIENE-ACRYLONITRILE
  • ABSPOLYMERS
  • ABSPOLYMER
  • NITRILERUBBERCOPOLYMERS
  • ACRYLONITRILE-BUTADIENE-STYRENEPOLYMERS
  • ABS rod
  • Acrylonitrile-butadiene-styrene rod
  • Transparent ABS
  • Plastic shell of television
  • Acrylonitrile-butadiene-styrene terpolymer,flame retarding
  • 3DXNANO ESD CNT-ABS carbon nanotube reinforced ABS 3D printing filament
  • ABS 3D printing filament
  • iONnylon/ABS alloy 3D printing filament
  • CarbonX CFR-ABS carbon fiber reinforced ABS 3D printing filament
  • 3DXMAX(TM) CFR-ABS carbon fiber reinforced ABS 3D printing filament
  • iON(TM)?nylon/ABS alloy 3D printing filament
  • 3DXNANO(TM) ESD CNT-ABS carbon nanotube reinforced ABS 3D printing filament
Copyright 2019 © ChemicalBook. All rights reserved