PEDOT:PEG
- CAS No.
- Chemical Name:
- PEDOT:PEG
- Synonyms
- PEDOT:PEG;Aedotron? P3-NM;Aedotron? C3-PC;Aedotron? C3-NM;Aedotron? P3-DCB;C12-PEG-block-PEDOT-block-PEG-C12;Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated;Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.7 wt. % (dispersion in nitromethane);Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.8 wt. % (dispersion in propylene carbonate), contains perchlorate as dopant
- CBNumber:
- CB52925209
- Molecular Formula:
- Molecular Weight:
- 0
- MDL Number:
- MOL File:
- Mol file
SAFETY
Risk and Safety Statements
| Symbol(GHS) |   GHS02,GHS07 |
|---|---|
| Signal word | Warning |
| Hazard statements | H226-H319 |
| Precautionary statements | P210-P233-P240-P241-P242-P305+P351+P338 |
| Hazard Codes | Xn,Xi,N |
| Risk Statements | 5-10-22-36-50/53-36/37/38 |
| Safety Statements | 26-61 |
| RIDADR | UN1261 - class 3 - PG 2 - Nitromethane, solution |
| WGK Germany | 2 |
PEDOT:PEG price More Price(4)
| Manufacturer | Product number | Product description | CAS number | Packaging | Price | Updated | Buy |
|---|---|---|---|---|---|---|---|
| Sigma-Aldrich | 736287 | Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.8 wt. % (dispersion in propylene carbonate), contains perchlorate as dopant | 25g | $137.4 | 2024-03-01 | Buy | |
| Sigma-Aldrich | 736309 | Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.8?wt. % (dispersion in 1,2-dichlorobenzene), contains p-toluenesulfonate as dopant | 25g | $202 | 2023-06-20 | Buy | |
| Sigma-Aldrich | 687316 | Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.7?wt. % (dispersion in nitromethane) | 25G | $296 | 2023-06-20 | Buy | |
| Sigma-Aldrich | 736295 | Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.7?wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant | 25g | $259 | 2023-01-07 | Buy |
PEDOT:PEG Chemical Properties,Uses,Production
Uses
A single-pass line has the following characteristics:
- Printed line width, 120 μm
- Printed line cross-sectional area, 14.1μm2
- Printed line average height, 70.6 ηm
- Sheet resistance, 2.0 kOhms/Square
- Resistivity, 14,021 μOhms·cm (71 S/cm)
- Fairly good optical clarity
Uses
PEDOT:PEG can be used as a hole transporting layer (HTL) that can be coated on indium tin oxide (ITO) substrate for the fabrication of polymeric solar cells (PSCs). It can also be used in the development of other electronic devices which include organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).
Uses
Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.
General Description
Lauryl terminated poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol) (PEDOT:PEG) is a conductive polymer that can be used as a hole injection layer (HIL) in organic electronics. It has a conductivity of 0.4 Scm-1 and a work function of 4.33eV. It forms a non-acidic solution which contains the perchlorate doped PEDOT-co-PEG.
PEDOT:PEG Preparation Products And Raw materials
Raw materials
Preparation Products
PEDOT:PEG Suppliers
| Supplier | Tel | Country | ProdList | Advantage | |
|---|---|---|---|---|---|
| Sigma-Aldrich | 021-61415566 800-8193336 | orderCN@merckgroup.com | China | 51471 | 80 |
| Supplier | Advantage |
|---|---|
| Sigma-Aldrich | 80 |