Anisole manufacturers and suppliers

Anisole suppliers

Properties

Melting point:: -37 °C (lit.)

Boiling point:: 154 °C (lit.)

Density: 0.995 g/mL at 25 °C (lit.)

vapor density: 3.7 (vs air)

vapor pressure: 10 mm Hg ( 42.2 °C)

refractive index: n20/D 1.516(lit.)

FEMA: 2097 | ANISOLE

Flash point:: 125 °F

storage temp.: Store below +30°C.

solubility: 1.71g/l

form: Liquid

color: Clear colorless

Relative polarity: 0.198

Odor: phenol, anise odor

Odor Threshold: 0.057ppm

Odor Type: phenolic

biological source: synthetic

explosive limit: 0.34-6.3%(V)

Water Solubility: 1.6 g/L (20 ºC)

Thermal Conductivity: 0.145 W/(m·K) at 25 ℃

Merck: 14,669

JECFA Number: 1241

BRN: 506892

Henry's Law Constant: 2.9×10^-2 mol/(m³Pa) at 25℃, Brockbank (2013)

Dielectric constant: 4.3（20℃）

Stability:: Stable. Flammable. Incompatible with strong oxidizing agents.

Cosmetics Ingredients Functions: PERFUMING

InChI: 1S/C7H8O/c1-8-7-5-3-2-4-6-7/h2-6H,1H3

InChIKey: RDOXTESZEPMUJZ-UHFFFAOYSA-N

SMILES: COc1ccccc1

LogP: 2.62 at 30℃

CAS DataBase Reference: 100-66-3(CAS DataBase Reference)

NIST Chemistry Reference: Benzene, methoxy-(100-66-3)

EPA Substance Registry System: Anisole (100-66-3)

Safety Information

Symbol(GHS): GHS02,GHS07

Signal word: Warning

Hazard statements: H226-H336

Precautionary statements: P210-P233-P240-P241-P242-P243

target organs: Central nervous system

PPE: Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter

Hazard Codes: Xn,Xi

Risk Statements: 10-38-20-36/37

Safety Statements: 37/39-26-16-24/25

RIDADR: UN 2222

WGK Germany: 2

RTECS: BZ8050000

Autoignition Temperature: 887 °F

TSCA: TSCA listed

HazardClass: 3

PackingGroup: III

HS Code: 29093090

Storage Class: 3 - Flammable liquids

Hazard Classifications: Flam. Liq. 3
STOT SE 3

Hazardous Substances Data: 100-66-3(Hazardous Substances Data)

Toxicity: LD50 orally in rats: 3700 mg/kg (Taylor)

Limited Quantities: 5.0 L (1.3 gallons) (liquid)

Excepted Quantities: Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L)

Use

Anisole, also known as anise ether, methoxybenzene methyl phenyl ether, is a colorless liquid with an odor of anise, sweet, naturally present in the tarragon oil, insoluble in water, soluble in alcohol, ether, acetone, soluble in benzene. It irritates the eyes and mucous membranes. It is obtained originally from distilled methyl salicylate or methoxybenzoate, is now mainly produced through the reaction of methylating agent of dimethyl sulfate with phenol in alkaline aqueous solution. Anisole is prone to start Electrophilic substitution reaction in aromatic nucleus, and condensed with formaldehyde to produce viscous oil or resin material, reacts with phosphorus trichloride to produce chlorine anisole and a small amount of o-chloro product, reacts with thionyl chloride to produce 2,4,6-trichloroanisole. In addition, anisole is heated to react with hydrobromic or hydroiodic, carbon-oxygen bond cleaves, phenol and halogenated methane is produced, which is an important method for determining methoxy group of benzene ring. The above information is edited by the chemicalbook of Yan Yanyong.

You can find Anisole suppliers, manufacturers, and distributors from countries such as CHINA, United States and the India here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.