MERCURY manufacturers and suppliers

Mercury suppliers

Properties

Melting point:: -38.9 °C

Boiling point:: 356.6 °C(lit.)

Density: 13.54

vapor density: 7 (vs air)

vapor pressure: <0.01 mm Hg ( 20 °C)

storage temp.: Poison room

solubility: H₂O: soluble

form: Triple Distilled Liquid

Specific Gravity: 13.5 (20/4℃)

Odor: Odorless

Resistivity: 95.8 μΩ-cm, 20°C

Water Solubility: 20–30μg/L in H2O; soluble in boiling H2SO4, HNO3 [KIR81] [HAW93]

Merck: 13,5925

Dielectric constant: 1.0（148℃）

Exposure limits: TLV-TWA 0.05 mg/m³ for Hg vapor, and 0.10 mg/m³, as Hg for alkyl mercury and inorganic compounds (ACGIH); ceiling 0.1 mg/m³ (OSHA); IDLH 28 mg/m³ (NIOSH).

Stability:: Stable. Incompatible with strong acids, sodium thiosulfate, ammonium hydroxide.

InChIKey: QSHDDOUJBYECFT-UHFFFAOYSA-N

Safety Information

Symbol(GHS): GHS06,GHS08,GHS09

Signal word: Danger

Hazard statements: H330-H360D-H372-H410

Precautionary statements: P201-P273-P304+P340+P310

Hazard Codes: T,N,Xn,C,T+

Risk Statements: 25-48/21/22-51/53-50/53-33-23-20/21/22-34-36/37/38-23/24/25-48/23-26-61-52/53-36/38

Safety Statements: 7-45-60-61-36-36/37/39-26-36/37-53

RIDADR: UN 3289 6.1/PG 2

WGK Germany: 3

RTECS: OV4550000

F: 10

TSCA: Yes

HS Code: 2805 40 90

HazardClass: 8

PackingGroup: III

Toxicity: LCLO inhal (rabbit)
29 mg/m3 (30 h)
PEL (OSHA)
0.1 mg/m3 (ceiling)
TLV-TWA (ACGIH)
0.025 mg/m3—skin

IDLA: 10 mg Hg/m3

Use

Cadmium is used in electroplating, in nickelcadmiumstorage batteries, as a coating forother metals, in bearing and low-meltingalloys, and as control rods in nuclear reactors.Cadmium compounds have numerousapplications, including dyeing and printingtextiles, as TV phosphors, as pigments andenamels, and in semiconductors and solarcells.

You can find Mercury suppliers, manufacturers, and distributors from countries such as China, United States and the India here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.