Myrcene manufacturers and suppliers

Myrcene suppliers

Properties

Melting point:: <-10 °C

Boiling point:: 167 °C (lit.)

Density: 0.791 g/mL at 25 °C (lit.)

vapor density: 4.7 (vs air)

vapor pressure: ~7 mm Hg ( 20 °C)

refractive index: n20/D 1.469(lit.)

FEMA: 2762 | MYRCENE

Flash point:: 103 °F

storage temp.: 2-8°C

solubility: water: soluble0.00109g/L at 20°C

form: Viscous Liquid

color: Clear light yellow

PH: 7 (H2O, 20℃)(saturated aqueous solution)

Odor: at 5.00 % in dipropylene glycol. peppery terpene spicy balsam plastic

Odor Type: spicy

Water Solubility: practically insoluble

JECFA Number: 1327

Merck: 14,6331

BRN: 1719990

Dielectric constant: 2.0（Ambient）

Stability:: Unstable - may be inhibited by the addition of ca. 400 ppm tenox GT-1 or 1000 ppm BHT. Flammable. Incompatible with strong oxidizing agents, radical initiators.

LogP: 4.82 at 30℃

Safety Information

Symbol(GHS): GHS02,GHS07,GHS09

Signal word: Warning

Hazard statements: H226-H315-H319-H410

Precautionary statements: P210-P233-P240-P273-P303+P361+P353-P305+P351+P338

Hazard Codes: Xi,Xn

Risk Statements: 10-36/37/38-R36/37/38-R10-65-38

Safety Statements: 16-26-36-37/39-S37/39-S26-S16-62

RIDADR: UN 2319 3/PG 3

WGK Germany: 2

RTECS: RG5365000

F: 10-23

HazardClass: 3.2

PackingGroup: III

HS Code: 29012990

Toxicity: Both the acute oral LD₅₀ value in rats and the acute dermal LD₅₀ value in rabbits exceeded 5 g/kg (Moreno, 1972).

Use

The unsaturated aliphatic hydrocarbons, such as MYRCENE, are generally much more reactive than the alkanes. Strong oxidizers may react vigorously with them. Reducing agents can react exothermically to release gaseous hydrogen. In the presence of various catalysts (such as acids) or initiators, compounds in this class can undergo very exothermic addition polymerization reactions. Many of these compounds undergo autoxidation upon exposure to the air to form explosive peroxides. Violent explosions have occurred at low temperatures in ammonia synthesis gas units. These explosions have been traced to the addition products of dienes and oxides of nitrogen, produced from the interaction of nitrogen oxide and oxygen [Bretherick, 1995].

You can find Myrcene suppliers, manufacturers, and distributors from countries such as China, United States and the United Kingdom here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.