Palladium manufacturers and suppliers

Palladium suppliers

Properties

Melting point:: 1554 °C(lit.)

Boiling point:: 2970 °C(lit.)

Density: 1.025 g/mL at 25 °C

storage temp.: no restrictions.

solubility: soluble in aqua regia

form: wire

color: Silver-gray

Specific Gravity: 12.03

Odor: Odorless

Resistivity: 9.96 μΩ-cm, 20°C

Water Solubility: INSOLUBLE

Electrical Conductivity: 1× 10⁷S/m

Thermal Conductivity: 71 W/(m·K)

Specific Heat Capacity: Cp(crystal): 0.24 J/(g·K); Cp(gas): 0.2 J/(g·K), at 25℃

Merck: 14,6989

Exposure limits: ACGIH: TWA 1 mg/m3
OSHA: TWA 15 mg/m3; TWA 5 mg/m3

Stability:: Stable. Flammable - fine powder may cause fire or explosion in air. Incompatible with ozone, sodium tetrahydroborate, sulphur, arsenic.

Cosmetics Ingredients Functions: COLORANT

InChI: 1S/Pd

InChIKey: KDLHZDBZIXYQEI-UHFFFAOYSA-N

SMILES: [Pd]

Modulus of Elasticity: 117 GPa

Poissons Ratio: 0.39

Hardness, Vickers: 37, Annealed
105, Cold Drawn

Shear Modulus: 42.0 GPa, Calculated

CAS DataBase Reference: 7440-05-3(CAS DataBase Reference)

NIST Chemistry Reference: Palladium(7440-05-3)

EPA Substance Registry System: Palladium (7440-05-3)

Safety Information

Symbol(GHS): GHS07

Signal word: Warning

Hazard statements: H315-H319

Precautionary statements: P305+P351+P338

Hazard Codes: T,F,Xi

Risk Statements: 61-33-37/38-40-41-36/37/38-11

Safety Statements: 53-26-36/37/39-24/25-36-22

RIDADR: UN 3089 4.1/PG 2

WGK Germany: nwg

RTECS: RT3480500

Autoignition Temperature: >1120 °F

TSCA: TSCA listed

HazardClass: 4.1

PackingGroup: III

HS Code: 28439000

Storage Class: 13 - Non Combustible Solids

Hazardous Substances Data: 7440-05-3(Hazardous Substances Data)

Toxicity: LD50 oral (rat) 200 mg/kg (palladium chloride)
LC50 intratracheal (rat) 6 mg/kg (palladium chloride)

REACH Registrations: Active

Limited Quantities: 1.0 Kg (2.2 lbs)

Excepted Quantities: Max Inner Pack (30g or 30ml) and Max Outer Pack (500g or 500ml)

Use

Palladium is a soft white metal found in copper and nickel ores. The chloride compound of this element was used after the turn of the century for printing and also in combination with platinum for printing. Palladium is a transition metal element used in catalytic reactions involving processes such as hydrogenation. Lindlar Catalyst. In form of gold, silver, and copper alloys in dentistry; for alloy bearings, springs, balance wheels of watches; for mirrors in astronomical instruments; as catalyzer in manufacture of sulfuric acid and in other oxidizing processes; in powder form as catalyst in hydrogenation and in ignition of hydrogen or hydrocarbons with oxygen; the spongy form is used in gas analysis for separating hydrogen from mixtures of gases.

You can find Palladium suppliers, manufacturers, and distributors from countries such as China, United States and the India here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.