POLYIMIDE RESIN manufacturers and suppliers

POLYIMIDE RESIN suppliers

POLYIMIDE RESIN

CAS:: 62929-02-6

MF:: C35H28N2O7

MW:: 588.60602

Suppliers by country/region

Company Type

Properties

Melting point:: >300°C

Density: 1.2

Flash point:: >93°(199°F)

form: Powder

Specific Gravity: 1.2

color: Yellow

Water Solubility: Insoluble in water.

InChIKey: CDTDIQLZIBORMV-UHFFFAOYSA-N

EPA Substance Registry System: 1,3-Isobenzofurandione, 5,5'-carbonylbis-, polymer with 1(or 3)-(4-aminophenyl)-2,3-dihydro-1,3,3(or 1,1,3)-trimethyl-1H-inden-5-amine (62929-02-6)

Safety Information

Symbol(GHS): GHS07

Hazard statements: H315-H319-H335

Precautionary statements: P261-P280a-P304+P340-P305+P351+P338-P405-P501a

TSCA: Yes

Use

Polyimides (PI, also known by alternative brand names: Pyralin Apical, Kapton, and Kaptrex) are polymers made of imide monomers (two carbonyl groups bonded to nitrogen). It has a density of 1430 kg/m3, Young’s modulus 3200 MPa, tensile strength (75–90) MPa, glass transition temperature > 400℃, thermal conductivity of 0.53 W/(m K), and a low relative dielectric constant of 2.9. Polyimides have applications similar to BCBs and also find applications as a low dielectric constant material in high-frequency interconnects (low-k material). The higher thermal conductivity and high glass transition temperature when compared to other types of insulating polymers also makes them a good choice where heat dissipation is important or other applications requiring good thermal management or low parasitic capacitances. Microchannels and high-frequency microdevices embedded in both photosensitive and nonphotosensitive polyimides have been fabricated and reported.

You can find POLYIMIDE RESIN suppliers, manufacturers, and distributors from countries such as China, United States and the United Kingdom here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.