Dextrin

Use

Physical characteristics of dextrin may vary slightly depending on the method of manufacture and on the source material. In aqueous solutions, dextrin molecules tend to aggregate as density, temperature, pH, or other characteristics change. An increase in viscosity is caused by gel at ion or retro gradation as dextrin solutions age,and is particularly noticeable in the less-soluble maize starch dextrins. Dextrin solutions are thixotropic, becoming less viscous when sheared but changing to a soft paste or gel when allowed to stand. However, acids that are present in dextrin as residues from manufacturing can cause further hydrolysis, which results in a gradual thinning of solutions. Residual acid, often found in lesssoluble dextrins such as pyrodextrin, will also cause a reduction in viscosity during dry storage. To eliminate these problems, dextrin manufacturers neutralize dextrins of low solubility with ammonia or sodium carbonate in the cooling vessel. The bulk material should be stored in a well-closed container in a cool, dry place.

Dextrin manufacturers

• Dextrin (excipients)
• 
• US $11.00 / KG
• 2024-04-26
• CAS:9004-53-9
• Min. Order: 20KG
• Purity: 99%
• Supply Ability: 1000kg

• Dextrin
• 
• US $5.00 / kg
• 2024-04-25
• CAS:9004-53-9
• Min. Order: 1kg
• Purity: 99%
• Supply Ability: 20 TONS

• Dextrin
• 
• US $6.00 / KG
• 2024-04-12
• CAS:9004-53-9
• Min. Order: 1KG
• Purity: More than 99%
• Supply Ability: 2000KG/Month