Related articles - Uses of Butylated hydroxyanisole
- Butylated hydroxyanisole (BHA) is an antioxidant consisting of a mixture of two isomeric organic compounds, 2-tert-butyl-4-hyd....
- Dec 1，2021
|
| | Butylated hydroxyanisole Basic information |
| | Butylated hydroxyanisole Chemical Properties |
| Melting point | 58-60 °C(lit.) | | Boiling point | 264-270°C | | density | 0.9976 (rough estimate) | | vapor density | 6.2 (vs air) | | FEMA | 2183 | BUTYLATED HYDROXYANISOLE | | refractive index | 1.4910 (estimate) | | Fp | >230 °F | | storage temp. | 2-8°C | | solubility | Practically insoluble in water; soluble in methanol;
freely soluble in ≥50% aqueous ethanol, propylene glycol,
chloroform, ether, hexane, cottonseed oil, peanut oil, soybean
oil, glyceryl monooleate, and lard, and in solutions of alkali
hydroxides. | | form | Crystalline Flakes or Crystals | | color | White to pale yellow | | Odor | mild rubbery | | Odor Type | rubbery | | Water Solubility | <0.1 g/100 mL at 18.5 ºC | | Merck | 14,1547 | | Stability: | Stable, combustible. Incompatible with oxidizing agents, ferric salts. Degrades on long exposure to sunlight. | | InChIKey | WYEIRNDSZQKIDQ-UHFFFAOYSA-N | | LogP | 3.00 | | IARC | 2B (Vol. 40, Sup 7) 1987 | | EPA Substance Registry System | Butylated hydroxyanisole (25013-16-5) |
| | Butylated hydroxyanisole Usage And Synthesis |
| Description | Butylated hydroxyanisole (BHA) is an antioxidant
widely used in food. Because it is contained in pastry,
it can induce sensitization in caterers. | | Chemical Properties | BHA and BHT (butylated hydroxytoluene) are monohydric phenolic antioxidants that, prior to their introduction and acceptance
in the food industry, were used to protect petroleum against oxidative degumming. Chemically, BHA is a mixture of two isomers,
3-tertiary-butyl-4-hydroxyanisole (90%) and 2-tertiary-butyl-4-hydroxyanisole (10%). Both BHA and BHT assert a good carry-through
effect, although BHA is slightly better than BHT in this respect. BHT is, however, more effective in suppressing oxidation of animal fats
than vegetable oils. Among its multiple applications, BHA is particularly useful in protecting the flavors and color of essential oils and is
considered the most effective of all food-approved antioxidants for this application. BHA is particularly effective in controlling the oxidation
of short-chain fatty acids, such as those found in coconut and palm kernel oils that are used typically in cereal and confectionary products. | | Chemical Properties | Log Kow 5. 3. Values above 3.0
are likely to bioaccumulate in aquatic organisms | | Chemical Properties | white or light yellow waxy solid with an | | Chemical Properties | Butylated hydroxyanisole occurs as a white or almost white
crystalline powder or a yellowish-white waxy solid with a faint,
characteristic aromatic odor. | | Occurrence | BHA is not known to occur as a natural product. | | Uses | Butylated Hydroxyanisole (BHA) is an antioxidant that imparts stability to fats and oils and should be added before oxidation has started. It is a mixture of 3-tert-butyl-4-hydroxyanisole and 2-tertbutyl-4-hydroxyanisole. In direct addition, the fat or oil is heated to 60–70°C and the BHA is added slowly under vigorous agitation. The maximum concentration is 0.02% based on the weight of the fat or oil. It may protect the fat-soluble vitamins A, D, and E. It is used singly or in combination with other antioxidants. It is used in cereals, edible fat, vegetable oil, confectionary products, and rice. | | Uses | BHA (butylated hydroxy anisole) is a preservative with anti-oxidant capabilities, not to be confused with beta hydroxy acids (BHAs). | | Uses | Antioxidant and preservative, especially in foods, cosmetics, pharmaceuticals; also rubber and petroleum products. | | Uses | Butylated Hydroxyanisole is an antioxidant consisting of a mixture of two isomers of tert-butyl-4-hydroxyanisole. Butylated Hydroxyanisole is used in food preservation as it antioxidant properties pre
vent food from becoming rancid. Butylated Hydroxyanisoleas is also used in animal feed, petroleum products, and cosmetics. | | Definition | A mixture of 2- and 3-tert-4-methoxyphenol. | | Production Methods | Prepared by the reaction of p-methoxyphenol with isobutene. | | Aroma threshold values | Detection: 3 ppm | | General Description | White, beige or slightly yellow waxy solid with an aromatic odor and a slightly bitter burning taste. | | Air & Water Reactions | Insoluble in water. | | Reactivity Profile | Butylated hydroxyanisole degrades with prolonged exposure to sunlight. Exhibits antioxidant properties and synergism with acids, BHT, propyl gallate, hydroquinone, methionine, lecithin and thiodipropionic acid. Butylated hydroxyanisole exhibits antioxidant properties as a scavenger of free radicals. Butylated hydroxyanisole is incompatible with oxidizing agents and ferric salts. | | Hazard | Toxic by ingestion. Use in foods restricted;
consult FDA regulations. | | Fire Hazard | Butylated hydroxyanisole is combustible. | | Pharmaceutical Applications | Butylated hydroxyanisole is an antioxidant with some
antimicrobial properties. It is used in a wide range of cosmetics,
foods, and pharmaceuticals. When used in foods, it is used to delay
or prevent oxidative rancidity of fats and oils and to prevent loss of
activity of oil-soluble vitamins.
Butylated hydroxyanisole is frequently used in combination with
other antioxidants, particularly butylated hydroxytoluene and alkyl
gallates, and with sequestrants or synergists such as citric acid.
FDA regulations direct that the total content of antioxidant in
vegetable oils and direct food additives shall not exceed 0.02% w/w
(200 ppm) of fat or oil content or essential (volatile) oil content of
food.
USDA regulations require that the total content of antioxidant
shall not exceed 0.01% w/w (100 ppm) of any one antioxidant or
0.02% w/w combined total of any antioxidant combination in
animal fats.
Japanese regulations allow up to 1 g/kg in animal fats. | | Contact allergens | BHA is an antioxidant widely used in cosmetics and food.
Contained in pastry, it can induce sensitization in caterers. | | Safety Profile | Confirmed carcinogen
with experimental carcinogenic,
neoplastigenic, and tumorigenic data.
Moderately toxic by ingestion and
intraperitoneal routes. Experimental
reproductive effects. Mutation data
reported. When heated to decomposition it
emits acrid and irritating fumes | | Safety | Butylated hydroxyanisole is absorbed from the gastrointestinal tract
and is metabolized and excreted in the urine with less than 1%
unchanged within 24 hours of ingestion. Although there have
been some isolated reports of adverse skin reactions to butylated
hydroxyanisole, it is generally regarded as nonirritant and
nonsensitizing at the levels employed as an antioxidant.
Concern over the use of butylated hydroxyanisole has occurred
following long-term animal feeding studies. Although previous
studies in rats and mice fed butylated hydroxyanisole at several
hundred times the US-permitted level in the human diet showed no
adverse effects, a study in which rats, hamsters, and mice were fed
butylated hydroxyanisole at 1–2% of the diet produced benign and
malignant tumors of the forestomach, but in no other sites.
However, humans do not have any region of the stomach
comparable to the rodent forestomach and studies in animals that
also do not have a comparable organ (dogs, monkeys, and guinea
pigs) showed no adverse effects. Thus, the weight of evidence does
not support any relevance to the human diet where butylated
hydroxyanisole is ingested at much lower levels. The WHO
acceptable daily intake of butylated hydroxyanisole has been set at
500 μg/kg body-weight.
LD50 (mouse, oral): 1.1–2.0 g/kg
LD50 (rabbit, oral): 2.1 g/kg
LD50 (rat, IP): 0.88 g/kg
LD50 (rat, oral): 2.0 g/kg | | Synthesis | Several methods are used for the commercial production of BHA. Methylation of hydroquinone yields an intermediate
that gives a mixture of 3-BHA and 2-BHA upon treatment with tert-butyl alcohol and phosphoric acid. Butylation of hydroquinone
and subsequent methylation with dimethyl sulfate and sodium hydroxide can also be used to produce a mixture of the two BHA isomers.
In addition BHA can be synthesized by the tert-butylation of 4-methoxyphenol over silica or alumina at 150°C. | | Carcinogenicity | Butylated hydroxyanisole (BHA) is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals. | | Environmental Fate | The metabolites of BHA can bind to cellular macromolecules,
such as proteins and DNA, and cause toxicity. | | storage | Exposure to light causes discoloration and loss of activity. Butylated
hydroxyanisole should be stored in a well-closed container,
protected from light, in a cool, dry place. | | Shipping | UN2811 Toxic solids, organic, n.o.s., Hazard
Class: 6.1; Labels: 6.1—Poisonous materials, Technical
Name Required. UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard class: 9; Labels: 9—
Miscellaneous hazardous material, Technical Name Required | | Toxicity evaluation | BHA is a white or slightly yellow, waxy solid with a characteristic
odor. It is insoluble in water, but soluble in fats, oils,
and solvents like petroleum ether, chloroform, and alcohol.
Its octanol/water partition coefficient is 3.50; vapor pressure is
2.48×10-3 mm Hg at 25°C; and Henry’s law constant is
1.17×10-6 atm-m3 mol-1.
BHA is released into the environment through waste
streams. It has low soil mobility and volatilizes slowly from
water. It may bioconcentrate in aquatic organisms, adsorb to
sediment, and be subject to direct photolysis. | | Incompatibilities | Butylated hydroxyanisole is phenolic and undergoes reactions
characteristic of phenols. It is incompatible with oxidizing agents
and ferric salts. Trace quantities of metals and exposure to light
cause discoloration and loss of activity. | | Waste Disposal | Suggested: Dispose of contents and container to an approved waste disposal plant. All federal, state,
and local environmental regulations must be observed. | | Regulatory Status | GRAS listed. Accepted as a food additive in Europe. Included in the
FDA Inactive Ingredients Database (IM and IV injections, nasal
sprays, oral capsules and tablets, and sublingual, rectal, topical, and
vaginal preparations). Included in nonparenteral medicines licensed
in the UK. Included in the Canadian List of Acceptable Nonmedicinal
Ingredients. |
| | Butylated hydroxyanisole Preparation Products And Raw materials |
|