Company Name: |
Chemsky(shanghai)International Co.,Ltd.
|
Tel: |
021-50135380 |
Email: |
shchemsky@sina.com |
Products Intro: |
Product Name:4-(N-Methyl-N-propenylaMino)-1-(3-pyridyl)-1-butanol
(Preparation Kit) CAS:870193-42-3 Purity:98% Package:26450RMB/1Kit;
|
Company Name: |
Energy Chemical
|
Tel: |
021-58432009 400-005-6266 |
Email: |
marketing@energy-chemical.com |
Products Intro: |
Product Name:4-(N-Methyl-N-propenylamino)-1-(3-pyridyl)-1-butanol (Preparation Kit) CAS:870193-42-3 Purity:NULL Package:1Kit Remarks:NULL
|
Company Name: |
Toronto Research Chemicals
|
Tel: |
+1 (416) 665-9696 |
Email: |
info@trc-canada.com |
Products Intro: |
CAS:870193-42-3 Package:2500USD/1Kit
|
|
| 4-(N-METHYL-N-PROPENYLAMINO)-1-(3-PYRIDYL)-1-BUTANOL, PREPARATION KIT Basic information |
| 4-(N-METHYL-N-PROPENYLAMINO)-1-(3-PYRIDYL)-1-BUTANOL, PREPARATION KIT Chemical Properties |
| 4-(N-METHYL-N-PROPENYLAMINO)-1-(3-PYRIDYL)-1-BUTANOL, PREPARATION KIT Usage And Synthesis |
Chemical Properties | 4-(N-METHYL-N-PROPENYLAMINO)-1-(3-PYRIDYL)-1-BUTANOL, PREPARATION KIT is White Foam | Uses | For inclusion of NNAL into a polymer matrix.Kit Contents:Vial 1: 0.5g 4-(N-Methyl)-1-(3-pyridyl)-1-butanol Vial 2: 0.5g Propionaldehyde Vial 3: 3g dried molecular sieves.(This experiment should be conducted by a trained chemist)Directions: In an efficient fume hood, add the contents of Vial 2 (anhydrous Toluene can be used to ensure complete transfer of the liquid) and Vial 3 to Vial 1. Dilute with 15mL of anhydrous Toluene and reseal tightly. Shake or stir at 50-60°C in the hood for 3 hours. After cooling the mixture is ready for use as is or after filtration to remove sieves. Gives approximately 100-200mg of final product if done correctly. | Uses | For inclusion of NNAL into a polymer matrix.
Kit Contents:Vial 1: 0.5g 4-(N-Methyl)-1-(3-pyridyl)-1-butanol
Vial 2: 0.5g Propionaldehyde
Vial 3: 3g dried molecular sieves.
(This experiment should be conducted by a trained chemist)
Directions: In an efficient fume hood, add the contents of Vial 2 (anhydrous Toluene can be used to ensure complete transfer of the liquid) and Vial 3 to Vial 1. Dilute with 15mL of anhydrous Toluene and reseal tightly. Shake or stir at 50-60°C in the hood for 3 hours. After cooling the mixture is ready for use as is or after filtration to remove sieves. Gives approximately 100-200mg of final product if done correctly. |
| 4-(N-METHYL-N-PROPENYLAMINO)-1-(3-PYRIDYL)-1-BUTANOL, PREPARATION KIT Preparation Products And Raw materials |
|