n-Propyl ether manufacturers
- n-Propyl ether
-
- $1.10 / 1g
-
2023-07-27
- CAS:111-43-3
- Min. Order: 1g
- Purity: 99.0% Min
- Supply Ability: 100 Tons
|
| | n-Propyl ether Basic information |
| Product Name: | n-Propyl ether | | Synonyms: | 1,1'-Oxybis[propane];1,1-Oxybispropane;1-Propoxypropane;1-propoxy-propane;Propane,1,1’-oxybis-;propane,1-propoxy-;Propoxy-propane;PROPYL ETHER | | CAS: | 111-43-3 | | MF: | C6H14O | | MW: | 102.17 | | EINECS: | 203-869-6 | | Product Categories: | | | Mol File: | 111-43-3.mol |  |
| | n-Propyl ether Chemical Properties |
| Melting point | -123 °C | | Boiling point | 88-90 °C(lit.) | | density | 0.736 g/mL at 25 °C(lit.) | | vapor pressure | 55 mm Hg ( 20 °C) | | refractive index | n20/D 1.380(lit.) | | Fp | 40 °F | | storage temp. | Flammables area | | solubility | H2O: slightly soluble | | form | Liquid | | color | Clear colorless | | Water Solubility | It is slightly soluble in water 3 g/L (20°C), soluble in alcohol and ether. | | Merck | 14,7857 | | BRN | 1731312 | | Dielectric constant | 3.4（26℃） | | CAS DataBase Reference | 111-43-3(CAS DataBase Reference) | | EPA Substance Registry System | Propyl ether (111-43-3) |
| | n-Propyl ether Usage And Synthesis |
| Chemical Properties | CLEAR COLOURLESS LIQUID | | Uses | Di-n-propyl ether, is used as a solvent and intermediate for organic chemical synthesis. | | General Description | A colorless liquid with a strong odor. Less dense than water and slightly soluble in water. Flash point of 70°F. Vapors are heavier than air. In high concentrations the vapors may be narcotic. | | Air & Water Reactions | Highly flammable. Ethers tend to form unstable peroxides when exposed to oxygen. Ethyl, isobutyl, ethyl tert-butyl, and ethyl tert-pentyl ether are particularly hazardous in this respect. Ether peroxides can sometimes be observed as clear crystals deposited on containers or along the surface of the liquid. Slightly soluble in water. | | Reactivity Profile | Ethers, such as DIPROPYL ETHER, can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert. | | Health Hazard | Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution. | | Fire Hazard | HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | | Safety Profile | Poison by intravenous
route. Moderately toxic by inhalation.
Possibly narcotic. A flammable liquid and
dangerous fire hazard when exposed to heat,
flame, or oxidizers. Forms explosive
peroxides. Dangerous upon exposure to
heat or flame; can react vigorously with
oxidizing materials. When heated to
decomposition it emits acrid smoke and
irritating fumes. See also ETHERS. | | Purification Methods | Purify the ether by drying with CaSO4, by passage through an alumina column (to remove peroxides), and by fractional distillation. [Beilstein 1 III 2146, 1 IV 1422.] |
| | n-Propyl ether Preparation Products And Raw materials |
|