| Company Name: |
Chemsky (shanghai) International Co.,Ltd
|
| Tel: |
021-50135380 |
| Email: |
shchemsky@sina.com |
| Products Intro: |
Product Name:Bolasterone;(7α,17β)-17-Hydroxy-7,17-diMethylandrost-4-en-3-one; 17β-Hydroxy-7α,17-diMethyl-
androst-4-en-3-one; 7α,17-DiMethyltestosterone; 17β-Hydroxy-7α,17α-
diMethylandrost-4-ene-3-one; 7α,17α-DiMethyl-17β-hydroxyandrost-4-en-3-one; 7α,17α-DiMethyltes
CAS:1605-89-6
Purity:98+% Package:1Mg;5Mg;10Mg;50Mg;100Mg;500Mg
|
| Company Name: |
Shanghai Saikerui Biotechnology Co. , Ltd.
|
| Tel: |
021-58000709 15900491054 |
| Email: |
info@scrbio.com |
| Products Intro: |
Product Name:4-ANDROSTEN-7α, 17α-DIMETHYL-17β-OL-3-ONE
CAS:1605-89-6
Purity:98+ Package:1mg;5mg;10mg
|
Bolasterone manufacturers
- Bolasterone
-
- $8800.00 / 1kg
-
2023-11-27
- CAS:1605-89-6
- Min. Order: 0.1kg
- Purity: 99%
- Supply Ability: 20 tons
|
| | Bolasterone Basic information |
| Product Name: | Bolasterone | | Synonyms: | 7,17-Dimethyltestosterone;Myagen;(7α,17β)-17-Hydroxy-7,17-diMethylandrost-4-en-3-one;17β-Hydroxy-7α,17-diMethyl-
androst-4-en-3-one;17β-Hydroxy-7α,17α-
diMethylandrost-4-ene-3-one;7α,17α-DiMethyltes;(7R,8R,9S,10R,13S,14S,17S)-17-hydroxy-7,10,13,17-tetramethyl-2,6,7,8,9,11,12,14,15,16-decahydro-1H-cyclopenta[a]phenanthren-3-one;17-Hydroxy-7,17-dimethyl-4-androsten-3-one | | CAS: | 1605-89-6 | | MF: | C21H32O2 | | MW: | 316.48 | | EINECS: | 216-519-2 | | Product Categories: | Intermediates & Fine Chemicals;Pharmaceuticals;Steroids | | Mol File: | 1605-89-6.mol |  |
| | Bolasterone Chemical Properties |
| Melting point | 163-165° | | Boiling point | 441.0±45.0 °C(Predicted) | | density | 1.09±0.1 g/cm3(Predicted) | | solubility | Chloroform (Slightly), Dioxane (Slightly), Methanol (Slightly) | | form | Solid | | pka | 15.13±0.70(Predicted) | | color | Off-White to Pale Yellow |
| DEA Controlled Substances | CSCN: 4000
CSA SCH: Schedule III
NARC: No |
| | Bolasterone Usage And Synthesis |
| Originator | Myagen,Upjohn | | Uses | Synthetic anabolic; epimeric with Calusterone (C148900).
Controlled substance (anabolic steroid). | | Definition | ChEBI: Bolasterone is a 3-hydroxy steroid. It has a role as an androgen. | | Manufacturing Process | A mixture of 0.4 g of cuprous chloride, 20 ml of 4 M methylmagnesium
bromide in ether and 60 ml of redistilled tetrahydrofuran was stirred and
cooled in an ice bath during the addition of a mixture of 2.0 g of 6-dehydro-
17-methyltestosterone, 60 ml of redistilled tetrahydrofuran and 0.2 g of
cuprous chloride. The ice bath was removed and stirring was continued for 4
h. Ice and water were than carefully added, the solution acidified with 3 N
hydrochloric acid and extracted several times with ether. The combined ether
extracts were washed with a brine-sodium carbonate solution, brine and then g column of magnesium silicate (Florisil) packed wet with hexanes
(Skellysolve B). The column was eluted with 250 ml of hexanes, 0.5 liter of
2% acetone, two liters of 4% acetone and 3.5 L of 6% acetone in hexanes.
The residues from fractions 8 to 16 were combined and rechromatographed
over a 125.0 g column of magnesium silicate. The column was eluted with 6%
acetone in hexanes. Fractions 18 to 29 were combined and dissolved in
acetone, decolorized with charcoal, and recrystallized from acetone. 1.0 g of a
crystalline mixture of the 7-epimers of 7,17-dimethyltestosterone was
obtained melting at 120° to 140°C.
The 7α-isomer are separated according to following procedure:
To obtain the 7(α)-isomer of 7,17-dimethyltestosterone the crystalline mixture
of the 7 stereoisomers of 7,17-dimethyltestosterone was refluxed in tertiary
butyl alcohol with recrystallized chloranil under nitrogen. The reaction mixture
was concentrated under a fast stream of nitrogen, diluted with methylene
chloride and the solution washed with dilute sodium hydroxide, water and
then dried, filtered and the solvent removed. The residue, was combined with
the product from an identical run and chromatographed through a magnesium
silicate column developed with solvent of the following composition and order:
two each of hexane hydrocarbons (Skellysolve B), hexanes plus 4% acetone,
hexanes plus 8% acetone, hexanes plus 12% acetone, hexanes plus 14%
acetone, hexanes plus 16% acetone, hexanes plus 18% acetone, hexanes
plus 20% acetone, hexanes plus 24% acetone, hexanes plus 28% acetone,
and two of acetone.
The residues, eluted with mixture: water-acetone, were combined and
chromatographed through a 50 g 1:1 charcoal (Darco)-diatomaceous earth
(Celite) column. The column was developed with solvent of the following
composition and order: methanol, a 1:1 mixture of methanol and acetone, a
1:2 mixture of methanol and acetone, acetone and a 1:4 mixture of acetone
and methylene chloride. Fractions, containing 7(α)-epimer were combined, the
solvent evaporated and the residue crystallized from acetone to give the
7α,17-dimethyltestosterone, melting point at 163° to 165°C. | | Therapeutic Function | Anabolic |
| | Bolasterone Preparation Products And Raw materials |
|