|
|
| | 2-(2-Aminoethylamino)ethanol Basic information |
| | 2-(2-Aminoethylamino)ethanol Chemical Properties |
| Melting point | -28 °C | | Boiling point | 238-240 °C/752 mmHg (lit.) | | density | 1.03 g/mL at 25 °C (lit.) | | vapor density | 3.6 (vs air) | | vapor pressure | <0.01 hPa (20 °C) | | refractive index | n20/D 1.485(lit.) | | Fp | >230 °F | | storage temp. | Store below +30°C. | | solubility | soluble | | pka | pK1:7.21(＋2);pK2:10.12(＋1) (25°C) | | form | Liquid | | color | Clear Colorless | | PH | 11.8 (111g/l, H2O, 20℃) | | Odor | mild ammoniacal odor | | explosive limit | 3.3-10.1%(V) | | Water Solubility | soluble | | Sensitive | Hygroscopic | | BRN | 506012 | | Dielectric constant | 18.989999999999998 | | Exposure limits | NIOSH: TWA 0.1 mg/m3 | | InChIKey | LHIJANUOQQMGNT-UHFFFAOYSA-N | | LogP | -2.2--1.46 at 20-25℃ and pH7-11 | | Surface tension | 67.11mN/m at 1g/L and 20℃ | | Dissociation constant | 6.83-9.82 at 25℃ | | CAS DataBase Reference | 111-41-1(CAS DataBase Reference) | | NIST Chemistry Reference | Ethanol, 2-[(2-aminoethyl)amino]-(111-41-1) | | EPA Substance Registry System | N-Hydroxyethylethylenediamine (111-41-1) |
| | 2-(2-Aminoethylamino)ethanol Usage And Synthesis |
| Description | Aminoethylethanolamine is a component of colophony
in soldering flux, which may cause contact and
airborne contact dermatitis in workers in the electronic
industry or in cable jointers. | | Chemical Properties | Aminoethylethanolamine is combustible, colorless, liquid with an ammonia-like odor. | | Chemical Properties | CLEAR VISCOUS LIQUID | | Uses | Textile finishing compounds (antifuming
agents, dyestuffs, cationic surfactants), resins, rubber products, insecticides, and certain medicinals. | | Uses | It is used as an important intermediate in the manufacture of lube oil additives, fuel additives, chelating agents, surfactants and fabric softeners among other applications. N-(2-Hydroxyethyl)ethylenediamine [N-(2-Aminoethyl)ethanolamine] is used to study the aerobic biodecomposition of amines in hypersaline wastewaters. | | Uses | N-(2-hydroxyethyl)ethylenediamine (hydeten) or [N-(2-aminoethyl)ethanolamine] can be used as:
- A precursor in the synthesis of room-temperature ionic liquids, acetate and formate ammonium salts of N-(2-hydroxyethyl)-ethylenediamine.
- A ligand in the preparation of polymeric cyano-bridged platinum(II)complexes, ligand-copper(II)carbohydrate complexes and cyano-bridged Ni-Pt and Cu-Pt coordination polymers.
It can also be used to study the aerobic biodecomposition of amines in hypersaline wastewaters. | | General Description | A clear colorless liquid with an ammonia-like odor. Corrosive to tissue. Combustible, but may be difficult to ignite. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals. | | Air & Water Reactions | Water soluble. Hygroscopic. | | Reactivity Profile | 2-(2-Aminoethylamino)ethanol is an amine and alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. 2-(2-Aminoethylamino)ethanol is hygroscopic. | | Health Hazard | Skin contact will cause mild irritation; eye contact will cause more severe irritation. | | Fire Hazard | 2-(2-Aminoethylamino)ethanol is combustible. | | Contact allergens | Aminoethylethanolamine is a component of colophony
in soldering flux, which may cause contact and airborne
contact dermatitis in workers in the electronic
industry or cable jointers. | | Potential Exposure | Used to make textile finishing compounds, dyes, resins, rubber, insecticides, medicines, and oth | | Shipping | UN2735 Amines, liquid, corrosive, n.o.s, or Polyamines, liquid, corrosive, n.o.s., Hazard class: 8; Labels: 8-Corrosive material, Technical Name Required. | | Purification Methods | Distil the amine twice through a Vigreux column (p 11). Redistil it from solid NaOH, then from CaH2. Alternatively, it can be converted to the dihydrochloride and recrystallised from water. It is then dried, mixed with excess of solid NaOH and the free base is distilled from the mixture. It is finally redistilled from CaH2. [Drinkard et al. J Am Chem Soc 82 2992 1960, Beilstein 4 IV 1558.] | | Incompatibilities | Contact with cellulose nitrate may cause fires upon contact. Reacts with Oxidizers, strong acids. |
| | 2-(2-Aminoethylamino)ethanol Preparation Products And Raw materials |
|