|
|
| | 2-(1-Cyclohexenyl)ethylamine Basic information |
| Product Name: | 2-(1-Cyclohexenyl)ethylamine | | Synonyms: | 1-CYCLOHEXENE-2-ETHANAMINE;2-AMINOETHYL-1-CYCLOHEXENE;2-(1-CYCLOHEXENYL)ETHYLAMINE;RARECHEM AN KA 1280;1-Cyclohexen-1-ylethylamine;2-(1-Cyclohexen-1-yl)ethanamine;2-(1-Cyclohexen-1-yl)ethylamine;beta-(1-Cyclohexenyl)ethylamine | | CAS: | 3399-73-3 | | MF: | C8H15N | | MW: | 125.21 | | EINECS: | 222-267-4 | | Product Categories: | Pharmaceutical Intermediates | | Mol File: | 3399-73-3.mol |  |
| | 2-(1-Cyclohexenyl)ethylamine Chemical Properties |
| Melting point | -55 °C | | Boiling point | 53-54 °C/2.5 mmHg (lit.) | | density | 0.898 g/mL at 25 °C (lit.) | | refractive index | 1.486-1.488 | | Fp | 57 °C | | solubility | Chloroform (Slightly), Methanol (Slightly) | | form | clear liquid | | pka | 10.94±0.10(Predicted) | | color | Colorless to Light yellow | | Sensitive | Air Sensitive | | BRN | 774030 | | Stability: | Light Sensitive | | InChI | 1S/C8H15N/c9-7-6-8-4-2-1-3-5-8/h4H,1-3,5-7,9H2 | | InChIKey | IUDMXOOVKMKODN-UHFFFAOYSA-N | | SMILES | NCCC1=CCCCC1 | | CAS DataBase Reference | 3399-73-3(CAS DataBase Reference) | | EPA Substance Registry System | 1-Cyclohexene-1-ethanamine (3399-73-3) |
| Hazard Codes | C | | Risk Statements | 34 | | Safety Statements | 28A-26-45-36/37/39 | | RIDADR | 2735 | | WGK Germany | 3 | | TSCA | TSCA listed | | HazardClass | 8 | | PackingGroup | II | | HS Code | 29213000 | | Storage Class | 3 - Flammable liquids | | Hazard Classifications | Flam. Liq. 3
Skin Corr. 1B |
| | 2-(1-Cyclohexenyl)ethylamine Usage And Synthesis |
| Chemical Properties | CLEAR COLOURLESS TO LIGHT YELLOW LIQUID | | Uses | 2-(1-Cyclohexenyl)ethylamine has been employed:
- as substrate for allylic hydroxylation reaction
- in preparation of thin films and single crystals of 2-(1-cyclohexenyl)ethyl ammonium lead iodide, used to fabricate optoelectronic-compatible heterostructures
| | Synthesis | 125 ml of ethylamine was placed in a 250 ml three-necked flask, which had previously been flushed with argon, at -70 ° C. 6.27 g (50 mmol) of 2-phenylethylamine was added. The resulting clear, colorless solution was metered in with 1.14 g (164.2 mmol) of Li powder; the solution turned dark blue 5 minutes after the onset of turbidity. After stirring for 2 hours at -70 ° C, the mixture was warmed to -30 ° C. Then another 0.24 g (34.6 mmol) of Li powder was added. After stirring again at -30 ° C. for 2 hours, the cooling bath was removed. The reaction mixture was allowed to warm to room temperature overnight. The reaction mixture was then given 25 ml of abs. After that, a gray suspension formed. After stirring for 20 minutes at room temperature, 25 ml of water was slowly added (exothermic temperature 40 ° C.). The excess ethylamine was then distilled off at 40 °C. The distillation residue was evaporated to dryness. Then, 100 ml of water was added and extracted 3 times with 80 ml chloroform. The combined organic phases were dried over NaSO, filtered, and evaporated. The
2-(1-Cyclohexenyl)ethylamine was obtained in a GC yield of 69.8%. | | Toxics Screening Level | The ITSL for cyclohexenylethylamine has been changed from 0.04 μg/m3 to 0.1 μg/m3
based on an annual averaging time. |
| | 2-(1-Cyclohexenyl)ethylamine Preparation Products And Raw materials |
|