- tert-Butanol
-
- $0.00 / 155Kg/Drum
-
2024-04-16
- CAS:75-65-0
- Min. Order: 155KG
- Purity: 99.5%
- Supply Ability: 5000mt
- tert-Butanol
-
- $1461.00 / 10Tons
-
2024-04-16
- CAS:75-65-0
- Min. Order: 10Tons
- Purity: 99.99%
- Supply Ability: 100Tons
- tert-Butanolvv
-
- $50.00 / 1KG
-
2023-12-23
- CAS:75-65-0
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: g-kg-tons, free sample is available
Related articles - What is tert-Butanol?
- tert-butyl alcohol, (CH3)3COH, also known as tert-Butanol, is a white crystalline solid or colorless liquid (above 77 °F) with....
- Apr 19，2021
|
| | tert-Butanol Basic information |
| Product Name: | tert-Butanol | | Synonyms: | 2-Methyl-2-propanol, tert-Butyl alcohol, Trimethyl carbinol;tert-Butanol,2-Methyl-2-propanol, tert-Butyl alcohol, Trimethyl carbinol;tert-Butanol, synthesis grade;tert-Butyl alcohol 5g [75-65-0];tert-Butyl alcohol 10g [75-65-0];tert-Butyl alcohol, anhydrous, 99.8%, packaged under Argon in resealable ChemSeal^t bottles;pseudobutyl alcohol;tert-ButanolACS reagent,
≥ 99.0% (GC) | | CAS: | 75-65-0 | | MF: | C4H10O | | MW: | 74.12 | | EINECS: | 200-889-7 | | Product Categories: | Organics;ACS and Reagent Grade Solvents;Carbon Steel Flex-Spout Cans;Plastic Bottles;ReagentPlus;ReagentPlus Solvent Grade Products;Semi-Bulk Solvents;Solvent Bottles;Solvent by Application;Solvent Packaging Options;Solvents;Anhydrous Solvents;Sure/Seal Bottles;Analytical Reagents;Analytical Reagents for General Use;Analytical/Chromatography;Histological Solvents;Puriss p.a. ACS;T-Z;75-65-0 | | Mol File: | 75-65-0.mol |  |
| | tert-Butanol Chemical Properties |
| Melting point | 23-26 °C (lit.) | | Boiling point | 83 °C (lit.) | | density | 0.775 g/mL at 25 °C (lit.) | | vapor density | 2.55 (vs air) | | vapor pressure | 31 mm Hg ( 20 °C) | | refractive index | n20/D 1.399(lit.) | | Fp | 95 °F | | storage temp. | Store at +5°C to +30°C. | | solubility | water: miscible | | pka | 19(at 25℃) | | form | Liquid After Melting | | color | APHA: ≤20 | | Relative polarity | 0.389 | | Odor | Characteristic; camphor-like; pungent. | | PH Range | 7 | | Odor Threshold | 4.5ppm | | explosive limit | 2.3-8.0%(V) | | Water Solubility | soluble | | λmax | λ: 215 nm Amax: 1.00
λ: 230 nm Amax: 0.50
λ: 250 nm Amax: 0.20
λ: 300-350 nm Amax: 0.01 | | Merck | 14,1542 | | JECFA Number | 85 | | BRN | 906698 | | Henry's Law Constant | 1.22 at 25 °C (static headspace-GC, Merk and Riederer, 1997) | | Exposure limits | TLV-TWA 300 mg/m3 (100 ppm) (ACGIH);
IDLH 8000 ppm. | | Dielectric constant | 7.8（19℃） | | Stability: | Stable. Very flammable. Incompatible with strong oxidizing agents, copper, copper alloys, alkali metals, aluminium. | | InChIKey | DKGAVHZHDRPRBM-UHFFFAOYSA-N | | LogP | 0.350 | | CAS DataBase Reference | 75-65-0(CAS DataBase Reference) | | NIST Chemistry Reference | Ethanol, 1,1-dimethyl-(75-65-0) | | EPA Substance Registry System | tert-Butanol (75-65-0) |
| | tert-Butanol Usage And Synthesis |
| Chemical Properties | tert-Butanol (CH3)3COH is a white crystalline solid or colorless liquid (above 77 °F) with a camphor-like odor (IPCS, 1987a; NIOSH, 2005). It is soluble in water and miscible with alcohol, ether, and other organic solvents (IPCS, 1987a). It is highly flammable and easily ignited by heat, sparks, or flames; vapors may form explosive mixtures with air. Fire and explosion may result from contact with oxidizing agents, strong mineral acids, or strong hydrochloric acid (NIOSH,1992).
tert-Butanol has been used for a variety of other purposes, including as a dehydrating agent and solvent. tert-butanol is a polar organic solvent that is used in such large scale applications as the manufacture of flavors, perfumes, and paint removers. It is also utilized as a denaturant for ethyl alcohol.
Tert-butanol is a metabolite of the gasoline additive methyl tert-butyl ether (MTBE).
tert-Butanol also is used to manufacture methyl methacrylate plastics and flotation devices. Cosmetic and food-related uses include the manufacture of flavors, and, because of its camphor-like aroma, it also is used to create artificial musk, fruit essences, and perfume (HSDB, 2007). It is used in coatings on metal and paperboard food containers (Cal/EPA, 1999) and industrial cleaning compounds, and can be used for chemical extraction in pharmaceutical applications (HSDB, 2007).
| | Physical properties | tert-Butanol is a colorless liquid or crystals with a camphor-like odor. A detection odor threshold concentration of 2,900 mg/m3 (957 ppmv) was experimentally determined by Dravnieks (1974). In a later study, Nagata and Takeuchi (1990) reported an odor threshold concentration 220 ppbv. | | Uses | Plastics, lacquers, cellulose esters, fruit
essences, perfumes, and chemical intermediates;
additive to unleaded gasoline | | Uses | tert-Butanol is used as a solvent (e.g., for paints, lacquers, and varnishes); as a denaturant for ethanol and several other alcohols; as an octane booster in gasoline; as a dehydrating agent; as a chemical intermediate in the manufacturing of methyl methacrylate; and in the manufacturing of flotation agents, fruit essences, and perfumes. | | Uses | tert-Butanol is used in the production of tert-butyl chloride, tert-butyl phenol, andisobutylene; in the preparation of artificial musk; and in denatured alcohols. | | Production Methods | tert-Butanol is produced as a by-product from the isobutane
oxidation process for manufacturing propylene
oxide. It is also produced by the acidcatalyzed
hydration of isobutylene, a process no longer used
in the United States. | | Definition | Tert-butanol is a tertiary alcohol alcohol that is isobutane substituted by a hydroxy group at position 2. It has a role as a human xenobiotic metabolite. It derives from a hydride of an isobutane. | | General Description | Colorless oily liquid with a sharp alcohol odor. Floats and mixes with water. Produces irritating vapor. Freezing point is 78°F. | | Air & Water Reactions | Highly flammable. Water soluble. | | Reactivity Profile | Attacks plastics. [Handling Chemicals Safely 1980. p. 236]. Acetyl bromide reacts violently with alcohols or water [Merck 11th ed. 1989]. Mixtures of alcohols with concentrated sulfuric acid and strong hydrogen peroxide can cause explosions. Example: an explosion will occur if dimethylbenzylcarbinol is added to 90% hydrogen peroxide then acidified with concentrated sulfuric acid. Mixtures of ethyl alcohol with concentrated hydrogen peroxide form powerful explosives. Mixtures of hydrogen peroxide and 1-phenylm-2-methyl propyl alcohol tend to explode if acidified with 70% sulfuric acid [Chem. Eng. News 45(43):73 1967; J, Org. Chem. 28:1893 1963]. Alkyl hypochlorites are violently explosive. They are readily obtained by reacting hypochlorous acid and alcohols either in aqueous solution or mixed aqueous-carbon tetrachloride solutions. Chlorine plus alcohols would similarly yield alkyl hypochlorites. They decompose in the cold and explode on exposure to sunlight or heat. Tertiary hypochlorites are less unstable than secondary or primary hypochlorites [NFPA 491 M 1991]. Base-catalysed reactions of isocyanates with alcohols should be carried out in inert solvents. Such reactions in the absence of solvents often occur with explosive violence [Wischmeyer 1969]. | | Hazard | Irritant to eyes and skin. Flammable, dan-
gerous fire risk. Central nervous system impair-
ment. Questionable carcinogen. | | Health Hazard | tert-Butanol is more toxic than secbutylalcohol but less toxic than the primaryalcohol. However, its narcotic actionis stronger than that of n-butanol. Inhalationmay cause drowsiness and mild irritationof the skin and eyes. Ingestion may produceheadache, dizziness, and dry skin.Acute oral LD50 value (rats): 3500 mg/kg.
| | Chemical Reactivity | Reactivity with Water: No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent. | | Safety Profile | Moderately toxic by
ingestion, intravenous, and intraperitoneal
routes. An experimental teratogen. Other
experimental reproductive effects.
Dangerous fire hazard when exposed to heat
or flame. Moderately explosive in the form
of vapor when exposed to flame. Ignites on
contact with potassium-sodum alloys. To
fight fire, use alcohol foam, CO2, dry
chemical. Incompatible with oxidizing
materials, H202. See also n-BUTYL
ALCOHOL and ALCOHOLS. | | Potential Exposure | tert-Butanol is used as solvents for
paints, lacquers, varnishes, natural and synthetic resins,
gums, vegetable oils, dyes, camphor, and alkaloids. They
are also used as an intermediate in the manufacture of pharmaceuticals and chemicals; In the manufacture of artificial
leather, safety glass; rubber and plastic cements, shellac,
raincoats, photographic films, perfumes; and in plastic
fabrication. | | Carcinogenicity | There were increased incidences
of renal tubule adenoma and carcinoma in male rats,
transitional epithelia hyperplasia of the kidney in male
and female rats, follicular cell adenoma of the thyroid in
female mice, and follicular cell hyperplasia of the thyroid
and inflammation and hyperplasia of the urinary bladder in
male and female mice. In addition, a slight increase in
follicular cell adenoma or carcinoma of the thyroid (combined)
in male mice may have been related to exposure to
t-butyl alcohol.
t-Butyl alcohol was inactive on mouse skin as a complete
carcinogen or as a tumor promoter. | | Source | Detected in a distilled water-soluble fraction of 94 octane unleaded gasoline at a
concentration of 3.72 mg/L (Potter, 1996) | | Shipping | UN1120 Butanols, Hazard Class: 3; Labels: 3—
Flammable liquid. UN1212 Isobutanol or Isobutyl alcohol,
Hazard Class: 3; Labels: 3—Flammable liquid | | Purification Methods | tert-Butanol is synthesised commercially by the hydration of 2-methylpropene in dilute H2SO4. Dry it with CaO, K2CO3, CaSO4 or MgSO4, filter and fractionally distil it. Dry further by refluxing with, and distilling from, either magnesium activated with iodine, or small amounts of calcium, sodium or potassium, under nitrogen. Passage through a column of type 4A molecular sieve is another effective method of drying; as well as refluxing with tert-butyl phthalate or succinate. (For method see Ethanol.) Other methods include refluxing with excess aluminium tert-butylate, or standing with CaH2, and distilling as needed. Further purification is achieved by fractional crystallisation by partial freezing, taking care to exclude moisture. tert-Butyl alcohol samples containing much water can be dried by adding *benzene, so that the water distils off as a tertiary azeotrope, b 67.3o. Traces of isobutylene have been removed from dry tert-butyl alcohol by bubbling dry pre-purified nitrogen through for several hours at 40-50o before using. It forms azeotropic mixtures with a large number of compounds. It has also been purified by distillation from CaH2 into Linde 4A molecular sieves which had been activated at 350o for 24hours [Jaeger et al. J Am Chem Soc 101 717 1979]. [Beilstein 1 IV 1609.] Rapid purification: Dry tert-butanol over CaH2 (5% w/v), distil and store it over 3A molecular sieves. | | Incompatibilities | tert-Butanol is incompatible with strong acids (including mineral acid), including mineral acids; strong oxidizers or caustics, aliphatic amines; isocyanates, alkali metals (i.e., lithium, sodium, potassium, rubidium, cesium, francium). | | Waste Disposal | Incineration, or bury absorbed
waste in an approved land fill. |
| | tert-Butanol Preparation Products And Raw materials |
| Raw materials | Ethanol-->Benzene-->Isobutylene-->1,3-Butadiene-->SULFATE STANDARD-->Liquefied petroleum ges-->Sodium tert-butoxide | | Preparation Products | ETHOPERMETHRIN，95%-->(R,R)-(+)-HYDROBENZOIN-->(2-TERT-BUTOXYFORMAMIDO-PYRIDIN-4-YL)METHYL METHANESULFONATE-->5-Bromo-7-azaindole-->(2-BROMO-PYRIDIN-3-YL)-CARBAMIC ACID TERT-BUTYL ESTER-->TERT-BUTYL GLYCIDYL ETHER-->4-TERT-BUTYL-2,6-DIMETHYL BENZYL ACETATE-->tert-Butyl peroxybenzoate-->tert-Butyl acetate-->2,4-Dichlorophenoxybutyric acid-->1-tert-Butyl-3,5-dimethylbenzene-->Dibutyl sebacate-->Di-tert-butyl peroxide-->tert-Butyl peroxypivalate-->TERT-BUTYL ISOTHIOCYANATE-->4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER-->1-CHLORO-4-ISOCYANOBENZENE-->TERT-BUTYL 4-(HYDROXYMETHYL)PYRIDIN-2-YLCARBAMATE-->Butoconazole-->6-tert-Butyl-m-cresol-->2,4-DI-(TERT-BUTOXY)-5-BROMOPYRIMIDINE-->2-tert-Butyl-4,5-dichloro-3-2H-pyridazinone-->tert-Butyl peroxy-2-ethylhexanoate-->Butylparaben-->4-Tert-butyl-2,6-dimethylbenzylchloroide-->2-tert-Butyl-4-methylphenol-->5-TERT-BUTOXYCARBONYLAMINO-PYRIDINE-3-CARBOXYLIC ACID-->sodium butyl 9(or 10)-(sulphonatooxy)octadecanoate-->4-(BROMOMETHYL)-BENZOIC ACID, 1,1-DIMETHYLETHYL ESTER-->4-PIPERIDINECARBOXYLIC ACID T-BUTYL ESTER HCL-->RH-5849(Rhom & Haas-->Butyl stearate-->Dispersant CS-->2,2'-Methylenebis(4-methyl-6-tert-butylphenol)-->TERT-BUTYL 4-(METHOXYCARBONYL)PYRIDIN-2-YLCARBAMATE-->BENZYL BUTYL ETHER |
|