- 2-Methylcyclohexanone
-
- $1.50 / 1g
-
2023-07-27
- CAS:583-60-8
- Min. Order: 1g
- Purity: 99.0% Min
- Supply Ability: 100 Tons
- 2-Methylcyclohexanone
-
- $0.00 / 1KG
-
2022-09-30
- CAS:583-60-8
- Min. Order: 1KG
- Purity: 98%
- Supply Ability: 1ton
- 2-Methylcyclohexanone
-
- $7.00 / 1KG
-
2019-09-02
- CAS: 583-60-8
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: JD 693
|
| 2-Methylcyclohexanone Basic information |
Product Name: | 2-Methylcyclohexanone | Synonyms: | Cyclohexanone, 2-methyl-;METHYLCYCLOHEXANONE, 2-(SG);TETRAHYDRO-O-CRESOL;O-METHYLCYCLOHEXANONE;2-METHYLCYCLOHEXANONE 99+%;o-Methylcycloexanone;2-Methylcyclohexanone,98%;Cyclohexanone, 2-methyl- (8CI, 9CI) | CAS: | 583-60-8 | MF: | C7H12O | MW: | 112.17 | EINECS: | 209-513-6 | Product Categories: | | Mol File: | 583-60-8.mol | |
| 2-Methylcyclohexanone Chemical Properties |
Melting point | -14 °C | Boiling point | 162-163 °C (lit.) | density | 0.924 g/mL at 25 °C (lit.) | vapor pressure | 1 at 20 °C (NIOSH, 1997) | refractive index | n20/D 1.448(lit.) | FEMA | 3946 | 2-METHYLCYCLOHEXANONE | Fp | 116 °F | storage temp. | Sealed in dry,2-8°C | solubility | Soluble in alcohol, ether (Weast, 1986), and many other polar organic solvents including
cyclohexanone. | form | Liquid | color | Clear colorless to very slightly yellow | Odor | at 10.00 % in dipropylene glycol. minty peppermint cooling | Odor Type | minty | explosive limit | 1.2%(V) | Water Solubility | Insoluble in water. Soluble in methanol and diethyl ether. | JECFA Number | 1102 | BRN | 506751 | Exposure limits | TLV-TWA 230 mg/m3 (50 ppm) (ACGIH);
STEL 345 mg/m3 (75 ppm); IDLH 2500
ppm (NIOSH). | Dielectric constant | 14.0(20℃) | InChIKey | LFSAPCRASZRSKS-UHFFFAOYSA-N | LogP | 1.54 at 25℃ | CAS DataBase Reference | 583-60-8(CAS DataBase Reference) | NIST Chemistry Reference | Cyclohexanone, 2-methyl-(583-60-8) | EPA Substance Registry System | 2-Methylcyclohexanone (583-60-8) |
Hazard Codes | Xn | Risk Statements | 10-20-20/21/22 | Safety Statements | 25-36/37 | RIDADR | UN 2297 3/PG 3 | OEB | A | OEL | TWA: 50 ppm (230 mg/m3), STEL: 75 ppm (345 mg/m3) [skin] | WGK Germany | 1 | RTECS | GW1750000 | TSCA | Yes | HazardClass | 3 | PackingGroup | III | HS Code | 29142200 | Hazardous Substances Data | 583-60-8(Hazardous Substances Data) | Toxicity | Acute oral LD50 for rats 2,140 mg/kg, rabbits 1 g/kg (quoted, RTECS, 1985). | IDLA | 600 ppm |
| 2-Methylcyclohexanone Usage And Synthesis |
Description | o-Methylcyclohexanone is a colorless liquid with a weak peppermint-like odor (also reported to be ace-tone-like). Molecular weight= 112.19; Specific gravity(H2O:1) = 0.93; Boiling point= 162.7℃; Freezing/Meltingpoint= - 13.9℃;Flashpoint = 47.8℃.HazardIdentification (based on NFPA-704 M Rating System):Health 2, Flammability 2, Reactivity 0. Insoluble in water. | Chemical Properties | o-Methylcyclohexanone is a colorless liquid
with a weak peppermint-like odor (also reported to be
acetone-like). | Chemical Properties | CLEAR COLOURLESS TO VERY SLIGHTLY YELLOW LIQUID | Chemical Properties | 2-Methylcyclohexanone has a weak, peppermint odor and burning sensation | Physical properties | Colorless liquid with a weak, peppermint-like odor. | Occurrence | Reported found in cockroaches as attractant pheromone; not reported found in natural foods | Uses | Solvent; rust remover | Uses | o-Methyl cyclohexanone is used as a solventfor varnishes, lacquers, and plastics; and asa rust remover. | Uses | 2-Methylcyclohexanone can be used as solvent, lacquers. It has been suggested for use in
soap perfumes, industrial fragrances, masking
odors, etc. where its power and stability come
to use. It may give "lift" to woody soap perfumes and add power to spicy-herbaceous
fragrances, but its proper odor is not exactly
beautiful. | Production Methods | 2-Methylcyclohexanone is manufactured by the catalytic
hydrogenation of o-cresol or by the dehydrogenation of
o-methylcyclohexanol. Methylcyclohexanones are
used in small amounts as general purpose solvents for
cellulose-based finishes and coatings. | Preparation | From cyclohexanone by treatment with a base and then with methyl iodide | Synthesis Reference(s) | Journal of the American Chemical Society, 108, p. 304, 1986 DOI: 10.1021/ja00262a025 Synthetic Communications, 8, p. 9, 1978 DOI: 10.1080/00397917808062176 Synthesis, p. 611, 1976 DOI: 10.1055/s-1976-24139 | General Description | A water-white to pale yellow liquid with an acetone-like odor. Less dense than water. Vapors heavier than air. Flash point near 135°F. May be toxic by ingestion. Used as a solvent. | Air & Water Reactions | Flammable. Slightly soluble in water. | Reactivity Profile | Contact with strong oxidizers may cause fires and explosions [USCG, 1999]. | Hazard | Moderate fire risk. Toxic by ingestion,inhalation, and skin absorption. Eye and upper res-piratory tract irritant, and central nervous systemimpairment. | Health Hazard | o-Methyl cyclohexanone is a mildly toxiccompound. Any health hazard from inhalingits vapors is low. Its vapors at highconcentrations in air can be irritating to theeyes, nose, and throat. Ingestion of the liquidcan cause sleepiness. Toxicity studies on animalssuggest that methyl cyclohexanone maycause an adverse effect on the lungs, kidney,and liver. An intravenous administration of270 mg/kg was lethal to mice. LD50 value, intraperitoneal (mice): 200mg/kg. | Health Hazard | May cause irritation of the eyes, nose and throat. Prolonged or repeated contact may cause dermatitis. | Fire Hazard | Special Hazards of Combustion Products: Irritating vapors and toxic gases, such as carbon monoxide, may be formed when involved in fire. | Flammability and Explosibility | Flammable | Safety Profile | Poison by
intraperitoneal route. Moderately toxic by
ingestion and skin contact. When heated to
decomposition it emits acrid smoke and
irritating fumes. | Potential Exposure | Methylcyclohexanone is used as a solvent in making varnish, plastics, and as a rust remover.
Also used in the leather industry. | First aid | this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit. | storage | Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. o-methylcyclohexanonemust be stored to avoid contact with strong oxidizers (suchas chlorine, bromine, and fluorine) because violent reactionsoccur. Sources of ignition, such as smoking and openflames, are prohibited where o-Methylcyclohexanone isused, handled, or stored in a manner that could create apotential fire or explosion hazard. Metal containers involving the transfer of 5 gallons or more of this chemical shouldbe grounded and bonded. Drums must be equipped withself-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Wherever this chemical is used, handled, manufactured,or stored, use explosion-proof electrical equipment andfittings. | Shipping | UN2297 Methylcyclohexanone, Hazard Class: 3;
Labels: 3-Flammable liquid. | Incompatibilities | Vapors may form explosive mixture with
air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep
away from alkaline materials, strong bases, strong acids,
oxoacids, epoxides. Contact with peroxides may form
unstable heat- and shock-sensitive explosives | Waste Disposal | Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All
federal, state, and local environmental regulations must
be observed |
| 2-Methylcyclohexanone Preparation Products And Raw materials |
|