|
|
| | Phosphotungstic acid hydrate Basic information |
| Product Name: | Phosphotungstic acid hydrate | | Synonyms: | Phosphotungstic acid hydrate 99.995% trace metals basis (Purity excludes up to 300 ppm Si);Phosphotungstic acid hydrate reagent grade;Phosphotungstic acid hydrate Vetec(TM) reagent grade;TUNGSTOPHOSPHORIC ACID LOW SODIUM NP;Hydrogen phosphotungstate hydrate (H3PW12O40.xH2O);12Tungsto(Ⅵ) Phosphoric Acid n-Hydrate;Tungstophosphoric acid hydrate for analysis EMSURE;Tungstophosphoric acid hydrate cryst. extra pure | | CAS: | 12501-23-4 | | MF: | H3O41PW12(-2) | | MW: | 2896.04 | | EINECS: | 603-020-3 | | Product Categories: | inorganic acid | | Mol File: | 12501-23-4.mol |  |
| | Phosphotungstic acid hydrate Chemical Properties |
| Melting point | ~95 °C(lit.) | | Boiling point | 107.9℃[at 101 325 Pa] | | density | 3.88[at 20℃] | | bulk density | 960kg/m3 | | vapor pressure | 19.2hPa at 20℃ | | storage temp. | room temp | | form | Solid | | color | White | | PH | 1.3 (20g/l, H2O, 20℃) | | Water Solubility | soluble | | Sensitive | Hygroscopic | | Exposure limits | ACGIH: TWA 3 mg/m3
NIOSH: TWA 5 mg/m3; STEL 10 mg/m3 | | Stability: | hygroscopic | | CAS DataBase Reference | 12501-23-4(CAS DataBase Reference) |
| | Phosphotungstic acid hydrate Usage And Synthesis |
| Chemical Properties | Crystalline | | Uses | Phosphotungstic acid hydrate may be used as a staining agent for the transmission electron microscope (TEM) imaging of cetyltrimethylammonium bromide (CTAB) coated gold nanorods.
It may be used in the preparation of:
- Phosphotungstic acid doped ormosil hybrid networks.
- Niobia supported phosphotungstic acid (PTA) catalysts.
- Titanium dioxide (TiO2) nanoparticles /phosphotungstic acid (HPW) films.
| | Uses | 12-Tungstophosphate hydrate is used in histology as a component for staining of cell specimens. It binds to fibrin, collagen and fibers of connective tissues. It is also used to replace the anions of dyes from these materials. In solution, it acts as a homogeneous catalyst and involved in the hydrolysis of propene to give 2-propanol. It is supported with alumina and silica and act as a heterogeneous catalyst involved in the dehydration of 2-propanol to propene and methanol to hydrocarbons. In analytical chemistry, it is used to precipitate proteins and termed as "universal" precipitant for polar proteins. | | Uses | Phosphotungstic acid hydrate has been a useful histology stain for cell specimens. | | General Description | Phosphotungstic acid hydrate is a heteropolyacid. | | Flammability and Explosibility | Not classified | | Purification Methods | A few drops of conc HNO3 are added to 100g of phosphotungstic acid dissolved in 75mL of water, in a separating funnel, and the solution is extracted with diethyl ether. The lowest of the three layers, which contains a phosphotungstic acid-ether complex, is separated, washed several times with 2M HCl, then with water and again extracted with ether. Evaporation of the ether under vacuum with mild heating on a water bath gives crystals which are dried under vacuum and ground [Matijevic & Kerker, J Am Chem Soc 81 1307 1959]. |
| | Phosphotungstic acid hydrate Preparation Products And Raw materials |
|