- CYCLOHEPTENE
-
- $100.00 / 1KG
-
2023-12-26
- CAS:628-92-2
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: g-kg-tons, free sample is available
- CYCLOHEPTENE
-
- $1.00 / 1KG
-
2020-02-05
- CAS:628-92-2
- Min. Order: 1KG
- Purity: 98%-99.9%HPLC
- Supply Ability: 100KG
- Cycloheptene
-
- $1.00 / 1KG
-
2020-01-08
- CAS: 628-92-2
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 20T
|
| | CYCLOHEPTENE Basic information |
| | CYCLOHEPTENE Chemical Properties |
| Melting point | -56 °C | | Boiling point | 112-114.7 °C (lit.) | | density | 0.824 g/mL at 25 °C (lit.) | | refractive index | n20/D 1.458(lit.) | | Fp | 20 °F | | storage temp. | Flammables area | | form | Liquid | | color | Clear colorless | | Water Solubility | Insoluble in water. | | BRN | 1900884 | | CAS DataBase Reference | 628-92-2(CAS DataBase Reference) | | EPA Substance Registry System | Cycloheptene (628-92-2) |
| Hazard Codes | F | | Risk Statements | 11 | | Safety Statements | 16-29-33 | | RIDADR | UN 2242 3/PG 2 | | WGK Germany | 1 | | HazardClass | 3 | | PackingGroup | II | | HS Code | 29038900 |
| | CYCLOHEPTENE Usage And Synthesis |
| Description | Cycloheptene is a flammable, colorless, oilyliquid. Molecular weight=96.2; Boiling point=115℃;Flash point=27℃ (also listed at 23℃). HazardIdentification (based on NFPA-704 M Rating System):Health 1, Flammability 3, Reactivity 0. Insoluble in water. | | Chemical Properties | CLEAR COLOURLESS LIQUID | | Uses | Cycloheptene was used in one-pot synthesis of 1,2/3-triols from the allylichydroperoxides catalyzed by zeolite-confined osmium(0) nanoclusters. It is a raw material in organic chemistry and a monomer in polymer synthesis. Copper (1) triflate catalyzes the photodimerization of the simple nonconjugated unstrained olefins, cyclopentene, cyclohexene, and cycloheptene, but not cyclooctene or acyclic olefins. | | Synthesis Reference(s) | The Journal of Organic Chemistry, 41, p. 896, 1976 DOI: 10.1021/jo00867a038 | | General Description | A colorless oily liquid. Insoluble in water and less dense than water. Flash point 70°F. Vapors heavier than air. Inhalation of high concentrations may have a narcotic effect. Used to make other chemicals. | | Air & Water Reactions | Highly flammable. Insoluble in water. | | Reactivity Profile | CYCLOHEPTENE may react vigorously with strong oxidizing agents. May react exothermically with reducing agents to release hydrogen gas. In the presence of various catalysts (such as acids) or initiators, may undergo exothermic addition polymerization reactions. | | Health Hazard | Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. | | Potential Exposure | Cycloheptene may be used in organicsynthesis | | First aid | If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit. | | storage | Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Cycloheptene must be stored to avoid contact with strongoxidizers (such as chlorine, bromine, and fluorine), sinceviolent reactions occur. Store in tightly closed containers ina cool, well-ventilated area. Sources of ignition, such assmoking and open flames, are prohibited where cycloheptene is used, handled, or stored in a manner that could create a potential fire or explosion hazard. Metal containersinvolving the transfer of=gallons or more of cyclohepteneshould be grounded and bonded. Drums must be equippedwith self-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of cycloheptene.Wherever cycloheptene is used, handled, manufactured, orstored, use explosion-proof electrical equipment andfittings. | | Shipping | Cycloheptene must be labeled “FLAMMABLELIQUID.” It falls in Hazard Class 3 and Packing Group II. | | Incompatibilities | Contact with strong oxidizers may causea fire or explosion hazard. |
| | CYCLOHEPTENE Preparation Products And Raw materials |
|