- 2,2-Dimethylbutane
-
- $1.10
-
2026-05-15
- CAS:75-83-2
- Min. Order: 1g
- Purity: 99.0% Min
- Supply Ability: 100 Tons
|
| | 2,2-Dimethylbutane Basic information |
| | 2,2-Dimethylbutane Chemical Properties |
| Melting point | −100 °C(lit.) | | Boiling point | 50 °C(lit.) | | density | 0.649 g/mL at 25 °C(lit.) | | vapor density | 2.97 (vs air) | | vapor pressure | 5.35 psi ( 20 °C) | | refractive index | n20/D 1.369(lit.) | | Fp | <−30 °F | | storage temp. | Flammables area | | solubility | In methanol: 590 and 800 g/L at 5 and 10 °C, respectively. Miscible at higher temperatures (Kiser
et al., 1961). Miscible with other aliphatic hydrocarbons, e.g., pentane, hexane, heptane, etc. | | form | Liquid | | pka | >14 (Schwarzenbach et al., 1993) | | color | Clear colorless to slightly yellow | | Odor Threshold | 20ppm | | explosive limit | ~7.7% | | Water Solubility | insoluble | | Thermal Conductivity | 0.0934 W/(m·K) at 25 ℃ | | Specific Heat Capacity | Cp(liquid): 2.23 J/(g·K), at 25℃ | | BRN | 1730736 | | Henry's Law Constant | 1.69(atmm3/mol) at 25 °C (Mackay and Shiu, 1981) | | Dielectric constant | 1.8700000000000001 | | Exposure limits | ACGIH TLV: TWA and STEL for all isomers except n-hexane are 500 and
1,000 ppm, respectively (adopted). | | Stability: | Stable, but may be moisture sensitive. Highly flammable. Incompatible with strong oxidizing agents. | | InChI | 1S/C6H14/c1-5-6(2,3)4/h5H2,1-4H3 | | InChIKey | HNRMPXKDFBEGFZ-UHFFFAOYSA-N | | SMILES | CCC(C)(C)C | | Surface tension | 16.23mN/m at 293.15K | | CAS DataBase Reference | 75-83-2(CAS DataBase Reference) | | NIST Chemistry Reference | Butane, 2,2-dimethyl-(75-83-2) | | EPA Substance Registry System | 2,2-Dimethylbutane (75-83-2) |
| Hazard Codes | F,Xn,N | | Risk Statements | 11-38-51/53-65-67 | | Safety Statements | 9-16-29-33-61-62 | | OEB | A | | OEL | TWA: 100.0 ppm; 350.0 mg/m3, STEL: 510.0 ppm; 1800.0 mg/m3 | | RIDADR | UN 1208 3/PG 2 | | WGK Germany | 3 | | RTECS | EJ9300000 | | Autoignition Temperature | 797 °F | | TSCA | TSCA listed | | HazardClass | 3 | | PackingGroup | II | | HS Code | 29011000 | | Storage Class | 3 - Flammable liquids | | Hazard Classifications | Aquatic Chronic 2
Asp. Tox. 1
Flam. Liq. 2
Skin Irrit. 2
STOT SE 3 | | Hazardous Substances Data | 75-83-2(Hazardous Substances Data) | | Toxicity | Reported as an impurity (0.2 wt %) in 99.0–99.7 wt % 2,3-dimethylbutane (Chevron Phillips,
2004). |
| | 2,2-Dimethylbutane Usage And Synthesis |
| Chemical Properties | 2,2-dimethylbutane is the chain isomeric form of hexane. It is a colorless and flammable liquid with a specific gravity of 0.6444. Insoluble in water, miscible with alcohol, ether, acetone, benzene and petroleum ether. The solubility is similar to that of hexane and 2-methylpentane. | | Physical properties | Clear, colorless liquid with a mild petroleum-like odor. Liquid quickly evaporates and forms
conbustible fumes. An odor threshold concentration of 20 ppmv was reported by Nagata and
Takeuchi (1990). | | Uses | 2,2-Dimethylbutane is an acyclic alkane. Its Research Octane Number (RON) has been reported to be 91.8. It is used to Component of high-octane motor and aviation fuels, intermediate for agricultural chemicals. | | Application | 2,2-Dimethylbutane may be employed as probe to investigate the nature of possible active sites in supported metal catalysts.
Some of the reported applications of 2,2-dimethylbutane include:
Palladium-catalyzed radical oxidative alkoxycarbonylation to prepare various alkyl carboxylates.
Iridium-iron-catalyzed tandem dehydrogenation-isomerization-hydrosilylation to synthesize corresponding silane. | | Production Methods | 2,2-Dimethylbutane is produced from crude oil, natural
liquid gases, and petroleum refining processes. | | Preparation | 2,2-Dimethylbutane can be synthesised by the hydroisomerisation of 2,3-dimethylbutane using an acid catalyst.
By the thermal or catalytic union (alkylation) of ethylene and isobutane, both recovered from refinery gases. | | General Description | Colorless liquid with an odor of gasoline. Less dense than water and insoluble in water. Hence floats on water. Irritating vapor. Flash point -54°F. | | Air & Water Reactions | Highly flammable. Insoluble in water. | | Reactivity Profile | 2,2-Dimethylbutane may be incompatible with strong oxidizing agents like nitric acid. Charring may occur followed by ignition of unreacted material and other nearby combustibles. In other settings, mostly unreactive. Not affected by aqueous solutions of acids, alkalis, most oxidizing agents, and most reducing agents. When heated sufficiently or when ignited in the presence of air, oxygen or strong oxidizing agents, burns exothermically to produce carbon dioxide and water. | | Hazard | Highly flammable, dangerous fire and
explosion risk, explosion limits 1.2–7% | | Health Hazard | Inhalation causes dizziness, nausea, and vomiting; concentrated vapor may cause unconsciousness and collapse. Contact with liquid causes irritation of eyes; repeated contact may produce irritation of skin. Ingestion causes irritation of stomach. Aspiration causes severe lung irritation, rapidly developing pulmonary edema, and central nervous system excitement followed by depression. | | Safety Profile | Probably an irritant and
narcotic in high concentration. A very
dangerous fire and explosion hazard when
exposed to heat or flame; can react
vigorously with oxidzing materials. Keep
away from heat or open flame. To fight fire,
use foam, CO2, dry chemical. When heated
to decomposition it emits acrid smoke and
irritating fumes. | | Environmental fate | Photolytic. Reported photooxidation rate constants for the reaction of 2,2-dimethylbutane with
OH radicals at 297, 299, and 300 K are 2.59 x 10-12, 6.16 x 10-12, and 2.59 x 10-12
cm3/moleculesec, respectively (Atkinson, 1985, 1990).
Chemical/Physical. Complete combustion in air yields carbon dioxide and water vapor. 2,2-
Dimethylbutane will not hydrolyze because it has no hydrolyzable functional group. | | Purification Methods | Distil it azeotropically with MeOH, then wash it with water, dry (Na2SO4) it, and distil it. [Beilstein 1 IV 367.] |
| | 2,2-Dimethylbutane Preparation Products And Raw materials |
|