|
|
| | Sodium poly[(naphthaleneformaldehyde)sulfonate] Basic information |
| | Sodium poly[(naphthaleneformaldehyde)sulfonate] Chemical Properties |
| Hazard Codes | Xi;N,N,Xi | | Risk Statements | 36/38 | | Safety Statements | 26-36 | | TSCA | TSCA listed | | Toxicity | LD50 oral in rat: 3800mg/kg |
| | Sodium poly[(naphthaleneformaldehyde)sulfonate] Usage And Synthesis |
| Chemical Properties | Sodium poly[(naphthaleneformaldehyde)sulfonate] is a brown powde，soluble in water, resistant to acid, alkali and hard water. Annd it has good diffusivity and excelllent resistant to high temperatures than NNO. Sodium poly[(naphthaleneformaldehyde)sulfonate] is commonly used as dispersant and filler of scattered dyes, reactive dyes, pesticides, leather tanning agent, also water reducing agent for construction and oil well. | | Uses | Used as a diluent for pulp control in the paper industry, reducing duplexity, improving filler or fines retention, improving sizing, and reducing coating viscosity.
Used as a high-efficiency dispersant for water-based coatings and pigment pastes.
Used as an adhesive, improve water resistance of filler powder andsealing layers. | | Synthesis | The solution of naphthalene(550kg)was heated at 50°C for 4h in the reaction kettle. Then cool down and pass water vapor to hydrolyze the by-product to give 1-naphthalenesulfonic acid. After the hydrolysis is completed, formaldehyde (37%) is added under 196kPa. Finally, alkali is added to neutralize to pH 8-10. The mixtrue was cooling and crystallization,and filtered out to give the product, Sodium poly[(naphthaleneformaldehyde)sulfonate] . |
| | Sodium poly[(naphthaleneformaldehyde)sulfonate] Preparation Products And Raw materials |
|