- 2-aminopyridine
-
- $59.00 / 1kg
-
2025-12-09
- CAS:504-29-0
- Min. Order: 1kg
- Purity: 0.98
- Supply Ability: 25kg
- 2-Aminopyridine
-
- $25.00 / 1kg
-
2025-12-03
- CAS:504-29-0
- Min. Order: 100kg
- Purity: 99.5%
- Supply Ability: 100 mt
- 2-Aminopyridine
-
- $5.00 / 1KG
-
2025-05-26
- CAS:504-29-0
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 10000kg
|
| | 2-Aminopyridine Basic information |
| | 2-Aminopyridine Chemical Properties |
| Melting point | 59 °C | | Boiling point | 204-210 °C(lit.) | | bulk density | 600kg/m3 | | density | 1.0308 (estimate) | | vapor pressure | 5 hPa (125 °C) | | refractive index | 1.5560 (estimate) | | Fp | 198 °F | | storage temp. | Store below +30°C. | | solubility | 890g/l | | pka | 6.82(at 20℃) | | form | Crystalline Powder, Crystals or Flakes | | color | Cream to light yellow-beige | | Odor | Characteristic odour | | Water Solubility | Slightly soluble. 1-5 g/100 mL at 19 ºC | | Sensitive | Hygroscopic | | Merck | 14,473 | | BRN | 105785 | | Exposure limits | NIOSH REL: TWA 0.5 ppm (2 mg/m3), IDLH 5 ppm; OSHA PEL: 0.5 ppm;
ACGIH TLV: TWA 0.5 ppm. | | LogP | 0.53 | | CAS DataBase Reference | 504-29-0(CAS DataBase Reference) | | NIST Chemistry Reference | 2-Pyridinamine(504-29-0) | | EPA Substance Registry System | 2-Aminopyridine (504-29-0) |
| | 2-Aminopyridine Usage And Synthesis |
| Chemical Properties | 2-Aminopyridine is a yellow or white crystalline (sand-like) solid with a characteristic odor. It is soluble in water, alcohol, benzene, ether and hot petroleum ether. It tastes bitter and has anesthetic effect. It is a significant synthetic synthon, with unique dual nucleophilic structure. It can react with ketones, aldehydes, acids, multifunctional esters, halogenated aromatics and other compounds to synthesize five- and six-member azaheterocycles. after prolonged storage, may darken in color. | | Uses | 2-Aminopyridine is used primarily in the pharmaceutical industry as an intermediate in chemical synthesis. It is used to manufacturing analgesic and anti-inflammatory drugs piroxicam and lornoxicam. 2-Aminopyridine is a basic building block of several heterocyclic compounds and Schiff bases. It has been shown to reversibly block voltage-dependent potassium channels, and is also a common impurity from the synthesis of compounds found in hair dyes. It is a derivatizing agent which can be used as a fluorescent label for oligosaccharide detection, chromatographic separation, fluorometric or mass spectrometric analysis. 2AP and its derivatives are good candidates for antimicrobial, anticorrosion and molecular sensing applications. | | Preparation | 2-Aminopyridine is manufactured using the reaction of pyridine with sodium amide (Chichibabin amination). It is obtained in high yield after the hydrolysis of the intermediate salt (Merck, 2001; Shimizu et al., 1993). | | Application | 2-Aminopyridine has also been used to derivatize sialyloligosaccharides for detection in FAB-MS. It can also be used:
As a reactant in the synthesis of 3-aroylimidazopyridines from chalcones by aerobic oxidative amidation using copper acetate catalyst.
In the synthesis of crystalline Cu(II) complex, di-μ-(2-aminopyridine(N,N′))-bis[(2,6 pyridinedicarboxylate)aquacopper(II)] tetrahydrate using 2,6-pyridinedicarboxylic acid and Cu(CH3COO)2.H2O.
As an imprinting molecule for the preparation of poly(methacrylic acid–ethylene glycol dimethacrylate) polymer. It is packed in micro-column for selective solid phase extraction of 2-aminopyridine.
As a reactant in the synthesis of 2-aryl-3-(pyridin-2-yl)-1,3-thiazolidin-4-ones in the presence of Lewis acid catalysts.
As a reactant in the synthesis of 2-(2-aminopyridinium)acetyl starch with antioxidant property. | | Synthesis Reference(s) | The Journal of Organic Chemistry, 72, p. 4554, 2007 DOI: 10.1021/jo070189y
Tetrahedron Letters, 11, p. 3901, 1970 | | General Description | 2-aminopyridine appears as white powder or crystals or light brown solid. It is soluble in water and alcohol. It is toxic by ingestion and by inhalation of the dust. It is used to make pharmaceuticals and dyes. (NTP, 1992) | | Air & Water Reactions | Decomposes in air. Soluble in water. | | Reactivity Profile | 2-Aminopyridine neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. May generate hydrogen, a flammable gas, in combination with strong reducing agents such as hydrides. Reacts with oxidizing agents . | | Hazard | Toxic. | | Health Hazard | 2-Aminopyridine causes central
nervous system effects. | | Fire Hazard | 2-Aminopyridine is combustible. | | Biological Activity | Aminopyridine 2 (1-((6-aminopyridin-3-yl)methyl)-3-(4-bromophenyl)urea) is an orally available, potent and selective irreversible inhibitor of myeloperoxidase (MPO) th at blocks vasomotor dysfunction in r at aortic rings. Aminopyridine 2 inhibits myeloperoxidase in a mouse model of peritonitis. | | Safety Profile | Poison by ingestion, inhalation, subcutaneous, intravenous, and intraperitoneal routes. Toxic effects resemble strychnine poisoning. Human systemic effects by inhalation: somnolence, convulsions, and antipsychotic effects. Human central nervous system effects by inhalation. When heated to decomposition it emits highly toxic fumes of NOx,. | | Potential Exposure | 2-Aminopyridine is used in the manufacture of pharmaceuticals; especially antihistamines. | | Carcinogenicity | The LD50 in mice by intraperitoneal injection
was 35 mg/kg; lethal doses in animals also
produced excitement, tremors, convulsions
and tetany.1 Fatal doses were readily absorbed
through the skin. A 0.2 M aqueous solution
dropped in a rabbit’s eye was only mildly
irritating.
2-Aminopyridine was not mutagenic in
a variety of Salmonella tester strains with or
without metabolic activation. | | Environmental fate | Soil. When radio-labeled 4-aminopyridine was incubated in moist soils (50%) under aerobic
conditions at 30 °C, the amount of 14CO2 released from an acidic loam (pH 4.1) and an alkaline,
loamy sand (pH 7.8) was 0.4 and 50%, respectively (Starr and Cunningham, 1975).
Chemical/Physical. Releases toxic nitrogen oxides when heated to decomposition (Sax and
Lewis, 1987). | | Shipping | UN2671 Aminopyridines, Hazard Class: 6.1; Labels: 6.1-Poisonous materials. | | Purification Methods | It crystallises from *benzene/pet ether (b 40-60o) or CHCl3 /pet ether. [Beilstein 22/8 V 280.] | | Incompatibilities | Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides | | Waste Disposal | Incineration with nitrogen oxides removal from effluent gas. | | References | [1] RAO R N, CHANDA K. 2-Aminopyridine – an unsung hero in drug discovery[J]. Chemical Communications, 2021, 3: 343-382. DOI:10.1039/D1CC04602K.
[2] D. M. BYSTROV L. L F. Reactivity of 2-aminopyridine N-oxides[J]. Russian Chemical Bulletin, 2024, 73 1: 33-52. DOI:10.1007/s11172-024-4120-2.
[3] KUMPINA I, BASKEVICS V, WALBY G D, et al. Synthesis of 2-Aminopyridine-Modified Peptide Nucleic Acids[J]. Synlett, 2023, 25 1: 0. DOI:10.1055/a-2191-5774.
[4] MEHMET TüMER. Antimicrobial activity studies of the binuclear metal complexes derived from tridentate Schiff base ligands[J]. Transition Metal Chemistry, 1999, 24 4: 414-420. DOI:10.1023/A:1006973823926. |
| | 2-Aminopyridine Preparation Products And Raw materials |
| Raw materials | Toluene-->Sodium carbonate-->Pyridine-->Sodium amide-->2-Bromopyridine-->6-Aminonicotinic acid-->Stainless steel tank | | Preparation Products | 2-Chloropyridine-->2-CHLORO-5-FLUOROISONICOTINIC ACID-->2-Bromopyridine-->2-Chloro-5-nitropyridine-->N-(3-FORMYL-2-PYRIDINYL)-2,2-DIMETHYLPROPANAMIDE-->2-Hydroxy-5-nitropyridine-->2-Fluoropyridine-5-boronic acid-->3-(2-Chloroethyl)-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one-->7-CHLORO-10-(4-HYDROXYANILINO)-2-METHOXY BENZO(B)-1,5-NAPHTHY RIDINE-->2-(5-BROMO-2-PYRIDYLAZO)-5-(DIETHYLAMINO)PHENOL-->5-(AMINOMETHYL)PYRIDIN-2-AMINE-->2-Acetamido-5-fluoropyridine-->1-(2-Pyridylazo)-2-naphthol-->Lornoxicam-->2-Amino-5-nitropyridine-->2-METHYL-IMIDAZO[1,2-A]PYRIDINE-3-CARBOXYLIC ACID ETHYL ESTER-->PYRIDINE-2,3,6-TRIAMINE-->2-METHYLIMIDAZO[1,2-A]PYRIDINE-3-CARBOXYLIC ACID-->Imazosulfuron-->2-Fluoro-5-iodopyridine-->2,5-Dibromo-3-nitropyridine-->IMIDAZO[1,2-A]PYRIDINE-2-CARBOXYLIC ACID-->Tenoxicam-->2-ACETAMIDO-5-AMINOPYRIDINE-->2,6-Diaminopyridine-->IMIDAZO[1,2-A]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER-->Sulfasalazine-->2-Acetamido-5-nitropyridine-->2-Chloro-5-iodopyridine-->Piroxicam-->2-Benzylaminopyridine-->Sulfapyridine |
|