|
|
| | (1-PHENYL-1-TOSYL)METHYL ISOCYANIDE Basic information |
| Product Name: | (1-PHENYL-1-TOSYL)METHYL ISOCYANIDE | | Synonyms: | A-TOSYLBENZYL ISOCYANIDE;ALPHA-TOSYLBENZYL ISOCYANIDE;(1-PHENYL-1-TOSYL)METHYL ISOCYANIDE;1-([ISOCYANO(PHENYL)METHYL]SULPHONYL)-4-METHYLBENZENE;alfa-Tosylbenzylisocyanide;1-(isocyano(p-tolyl)methylsulfonyl)-4-methylbenzene;Isocyano(phenyl)methyl 4-methylphenyl sulphone;Benzene,1-[(isocyanophenylMethyl)sulfonyl]-4-Methyl- | | CAS: | 36635-66-2 | | MF: | C15H13NO2S | | MW: | 271.33 | | EINECS: | 200-258-5 | | Product Categories: | pharmacetical | | Mol File: | 36635-66-2.mol |  |
| | (1-PHENYL-1-TOSYL)METHYL ISOCYANIDE Chemical Properties |
| Melting point | 106 °C(dec.) | | storage temp. | under inert gas (nitrogen or Argon) at 2-8°C | | form | powder to crystal | | color | White to Light yellow to Light orange |
| Hazard Codes | Xi | | Hazard Note | Irritant | | HS Code | 2930909899 |
| | (1-PHENYL-1-TOSYL)METHYL ISOCYANIDE Usage And Synthesis |
| Preparation | A 1-L, three-necked, roundbottomed flask fitted with an overhead stirrer, a 100 mL addition funnel, and a temperature probe was charged with THF (200 mL) and 1615 (27.6 g, 94.8 mmol). Phosphoryl chloride (17.7 mL, 190 mmol) was added and the resulting solution was stirred for 5 min at 25 C??. After cooling the solution to 0 C??, triethylamine (79.3 mL, 569 mmol) was added slowly over 30¨C45 min while keeping the internal reaction temperature below 10 C??. After the addition of triethylamine was complete, the reaction mixture was warmed to 5¨C10 C?? and maintained at this temperature for 30¨C45 min. Ethyl acetate (140 mL) and water (140 mL) were added sequentially to the reaction mixture, stirring was continued for 5 min, and then the mixture was transferred to a separatory funnel and the aqueous layer was removed. The organic layer was washed with water (2?á140 mL), saturated sodium hydrogen carbonate solution (140 mL), and brine (70 mL). The organic layer was transferred to a 500-mL, round-bottomed flask and concentrated on a rotary evaporator. The residue was diluted with 1-propanol (140 mL) and this solution was concentrated on a rotary evaporator to half of its original volume. The residue was cooled to 5¨C10 C?? for 30 min and the beige solid that crystallized was collected by filtration through a Buchner funnel. The filter cake was rinsed with 1-propanol (2?á75 mL). The beige solid was dried in vacuo for 3¨C4 h to give 18.1¨C19.7 g (70¨C 76%) of a-tosylbenzyl isocyanide 1616.
Structurally analogous to TosMIC 1600 is PhosMIC 1617, which has a phosphonate residue instead of a sulfonate residue. Some representatives have been described by Bartlett. |
| | (1-PHENYL-1-TOSYL)METHYL ISOCYANIDE Preparation Products And Raw materials |
|