1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imid NEW

1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imid

Modify Date: 2024-01-14 10:52:48

1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imid structure	Common Name	1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imid
	CAS Number	433337-23-6	Molecular Weight	503.524
	Density	N/A	Boiling Point	N/A
	Molecular Formula	C16H27F6N3O4S2	Melting Point	-19 °C
	MSDS	N/A	Flash Point	N/A

Purity		Quantity		Budget		Inquiry

• Properties

• Spectrum

---

 Names

Name	1-Decyl-3-Methylimidazolium Bis(Trifluoromethylsulfonyl)Imide
Synonym	More Synonyms

 Chemical & Physical Properties

Melting Point	-19 °C
Molecular Formula	C16H27F6N3O4S2
Molecular Weight	503.524
Exact Mass	503.134705
PSA	93.85000
LogP	6.67420
Index of Refraction	1.44

 MSDS

1-Decyl-3-methylimidazolium Revision number: 5 Bis(trifluoromethanesulfonyl)imide SAFETY DATA SHEET Section1. IDENTIFICATION Product name:1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDSNot classified Not classified HEALTH HAZARDS ENVIRONMENTAL HAZARDSNot classified GHS label elements, including precautionary statements Pictograms or hazard symbolsNone Signal wordNo signal word Hazard statementsNone Precautionary statements:None Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance Substance/mixture: Components:1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide >98.0%(LC)(T) Percent: CAS Number:433337-23-6 Chemical Formula:C16H27F6N3O4S2 Section4. FIRST AID MEASURES Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Remove/Take off immediately all contaminated clothing. Rinse skin with Skin contact: water/shower. If skin irritation or rash occurs: Get medical advice/attention. Rinse cautiously with water for several minutes. Remove contact lenses, if present Eye contact: and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth. Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air- tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. 1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Section5. FIRE-FIGHTING MEASURES Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak. protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled emergency procedures: around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust). containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected up: material should be promptly disposed of, in accordance with appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Wash hands and face thoroughly after handling. Use a ventilation, local exhaust if vapour or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a cool and dark place. Store away from incompatible materials such as oxidizing agents. Packaging material:Comply with laws. Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Install a closed system or local exhaust as possible so that workers should not be Engineering controls: exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Vapor respirator. Follow local and national regulations. Hand protection:Protective gloves. Eye protection:Safety glasses. A face-shield, if the situation requires. Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Liquid Form:Clear Colour:Pale yellow - Yellow Odour:No data available pH: No data available Melting point/freezing point:-19°C No data available Boiling point/range: Flash point:No data available Flammability or explosive limits: No data available Lower: Upper:No data available 1.29 Relative density: Solubility(ies): No data available [Water] [Other solvents]No data available Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. 1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide Section10. STABILITY AND REACTIVITY Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Hydrogen fluoride, Sulfur products:oxides Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available No data available NTP = Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available Crustacea:No data available Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil No data available Log Pow: Soil adsorption (Koc):No data available Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:Does not correspond to the classification standard of the United Nations Not listed UN-No: Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. 1-Decyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide SECTION 16 - ADDITIONAL INFORMATION N/A

 Synthetic Route

Total: 1 Page

methylimidazole CAS#:616-47-7 1-Bromodecane CAS#:112-29-8 Lithium bis(tri... CAS#:90076-65-6 ~% 1-Decyl-3-methy... CAS#:433337-23-6

Literature: Dzyuba, Sergei V.; Bartsch, Richard A. Tetrahedron Letters, 2002 , vol. 43, # 26 p. 4657 - 4659

1-Bromodecane CAS#:112-29-8 ~% 1-Decyl-3-methy... CAS#:433337-23-6

Literature: Alammar, Tarek; Mudring, Anja-Verena ChemSusChem, 2011 , vol. 4, # 12 p. 1796 - 1804

1-decyl-3-methy... CAS#:654077-64-2 Sodium bis(trif... CAS#:91742-21-1 ~% 1-Decyl-3-methy... CAS#:433337-23-6

Literature: Murray, Samuel M.; O'Brien, Richard A.; Mattson, Kaila M.; Ceccarelli, Christopher; Sykora, Richard E.; West, Kevin N.; Davis Jr., James H. Angewandte Chemie - International Edition, 2010 , vol. 49, # 15 p. 2755 - 2758

 Precursor & DownStream

Precursor  5	Previous 1/2 Next
CAS#:616-47-7 methylimidazole  CAS#:112-29-8 1-Bromodecane  CAS#:90076-65-6 Lithium bis(tri...  CAS#:654077-64-2 1-decyl-3-methy...

Company Profile

     Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. 

     We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.

     Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.

     As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.

Our Advantage

Quality control

Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.

Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Technological innovation

Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.

Competitiveness

Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.

Word of mouth

Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.

Rich experience

Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.

Safe and fast delivery

We will arrange shipment of spot products as soon as we receive payment.

Customized products are determined based on the synthesis time of different products.

Excellent pre-sales and after-sales service

Pre sales:

We are committed to providing the most favorable quotes and detailed information about our products and company.

After-sale service:

We assist buyers in customs clearance by providing necessary documents and information.

If there is any dispute over product quality, we are committed to providing the best solution.

Our packaging and shipping

• Packaging: 

1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.

• Shipping

• Delivery:

Within 7 days after receiving your payment

Contact information

For more details, pls contact us freely.

Email: jiuyitime@fdachem.com

 Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!