ChemicalBook >>Phenyl phosphine>>Phenyl phosphine(638-21-1)

Phenyl phosphine(638-21-1)

Phenyl phosphine(638-21-1)
Product IdentificationBack to Contents
【Product Name】

Phenyl phosphine



【Molecular Weight】



【RTECS Class】


【Beilstein Reference】

Physical and Chemical PropertiesBack to Contents

Clear colorless liquid.Has an intense penetrating odor.
【Solubility in water】

【Boiling Point】


1.001 g/cm3 (20 C)

Function as ligands in ge, sn, and pb complexes, uses in polymer synthesis.
【Refractive Index】

1.5785 (20 C)
First Aid MeasuresBack to Contents

If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. MMEDIATELY transport the victim to a hospital.

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents

See inhalation.

In animals:, causes blood changes, anemia, testicular degeneration; loss of appetite, diarrhea, lacrimation (discharge of tears), hind leg tremor; dermatitis Target Organs: Blood, central nervous system, skin, reproductive system.

See inhalation.

See inhalation.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Exposure limit(s)】

NIOSH REL: C 0.05 ppm (0.25 mg/m3)
Fire Fighting MeasuresBack to Contents
【Flash Point】

【Fire Fighting】

Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
【Fire Potential】

This material is probably combustible.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents

Can react vigorously with oxidizing materials Incompatible with oxidizers such as atmospheric oxygen Incompatible with acids, particularly oxidizing acids.

Spontaneously combustible in high concentrations in air. Potential exposure to gaseous PF when polyphosphinates are heated above 200 C.
Company Name:ZhengZhou HuaWen Chemical Co.Ltd
Company Name:J & K SCIENTIFIC LTD.
Tel:010-82848833- ;010-82848833-
Company Name:Alfa Aesar
Tel:400-610-6006; 021-67582000
Company Name:ShangHai DEMO Chemical Co.,Ltd
Tel:400-021-7337 qq:2355568890
Company Name:BeiJing Hwrk Chemicals Limted
Company Name:Energy Chemical
Company Name:JinYan Chemicals(ShangHai) Co.,Ltd.
Company Name:Beijing VSciChem Technology Co., Ltd.