ChemicalBook >>Phenazopyridine hydrochloride>>2,6-Diamino-3-phenylazopyridine hydrochloride(136-40-3)

2,6-Diamino-3-phenylazopyridine hydrochloride(136-40-3)

2,6-Diamino-3-phenylazopyridine hydrochloride(136-40-3)
Product IdentificationBack to Contents
【Product Name】

2,6-Diamino-3-phenylazopyridine hydrochloride
【Synonyms】

2,6-Diamino-3-phenylazopyridine hydrochloride
2,6-Pyridinediamine, 3-(phenylazo)-, monohydrochloride
Azodyne
Pyridium
Pyripyridium
Uridinal
【CAS】

136-40-3
【Formula】

C11H12ClN5
【Molecular Weight】

249.7
【EINECS】

205-243-8
【RTECS】

US7875000
【RTECS Class】

Tumorigen; Drug; Mutagen; Human Data
【Merck】

12,7361
【Beilstein/Gmelin】

4924060
【Beilstein Reference】

2-22-00-00514
Physical and Chemical PropertiesBack to Contents
【Appearance】

Brick-red microcrystals with a slight violet luster or a purple powder. Aqueous solutions are yellow to brick-red and slightly acidic; they may be stabilized by the addition of 10% glucose. Slightly bitter taste.
【Melting Point】

138.9
【Usage】

Prescribed for its local analgesic effects on the urinary tract.
First Aid MeasuresBack to Contents
【Ingestion】

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.
【Inhalation】

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
【Skin】

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
【Eyes】

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Ingestion】

See inhalation.
【Inhalation】

Symptoms of exposure to this compound via ingestion may include headache, rash, occasional gastrointestinal disturbances, orange to red color in the urine, hemolytic anemia, renal and hepatic toxicity, and staining of contact lenses. It may cause methemoglobinemia. It may cause gastrointestinal upset. Overdose may cause oxidative Heinz body hemolytic anemia, presence of bite cells, hemolysis, renal and hepatic impairment and occasional failure, due to hypersensitivity. Overdose may also result in hepatic enlargement, jaundice and hypersensitivity hepatitis.
【Skin】

See inhalation.
【Eyes】

See inhalation
【EC Risk Phrase】

R 45 22
【EC Safety Phrase】

S 53 45
【UN (DOT)】

2811
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter).
【Poison Class】

3
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
【Fire Potential】

This material is probably combustible.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you spill this chemical, you should dampen the solid spill material with 5% acetic acid, then transfer the dampened material to a suitable container. Use absorbent paper dampened with 5% acetic acid to pick up any remaining material. Your contaminated clothing and the absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with 5% acetic acid followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Incompatibilities】

Toxic gases are formed by mixing materials of this class with acids, aldehydes, amides, carbamates, cyanides, inorganic fluorides, halogenated organics, isocyanates, ketones, metals, nitrides, peroxides, phenols, epoxides, acyl halides, and strong oxidizing or reducing agents Flammable gases are formed by mixing materials in this group with alkali metals Explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides.
Transport InformationBack to Contents
【UN Number】

2811
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: 3B Pharmachem (Wuhan) International Co.,Ltd.
Tel: 821-50328103-801 18930552037
Fax: 86-21-50328109
WebSite: https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Beijing Ouhe Technology Co., Ltd
Tel: 010-82967028 13552068683
Fax: +86-10-82967029
WebSite: http://www.ouhechem.com/
Company Name: Adamas Reagent, Ltd.
Tel: 400-6009262 16621234537
Fax: 021-64823266
WebSite: www.tansoole.com