ChemicalBook >>5-Methyl furfural>>5-Methyl furfural(620-02-0)

5-Methyl furfural(620-02-0)

5-Methyl furfural(620-02-0)
Product IdentificationBack to Contents
【Product Name】

5-Methyl furfural
【Synonyms】

2-Methyl-5-formylfuran
5-Methyl-2-furaldehyde
5-Methyl-2-furancarboxaldehyde
5-Methylfuran-2-al
5-Methylfuran-2-carbaldehyde
5-Methylfurfuraldehyde
【CAS】

620-02-0
【Formula】

C6H6O2
【Molecular Weight】

110.11
【EINECS】

210-622-6
【RTECS】

LT7032500
【RTECS Class】

Mutagen; Natural Product
【Beilstein/Gmelin】

106895
【Beilstein Reference】

5-17-09-00404
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear dark yellow liquid.
【Solubility in water】

Soluble
【Boiling Point】

89
【Density】

1.1365 g/cm3 (0 C)
【Vapor Density】

3.79
【Refractive Index】

1.5295 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

Causes respiratory tract irritation. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

Causes skin irritation. May cause cyanosis of the extremities.
【Eyes】

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
【EC Safety Phrase】

S 23 24/25
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】

Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed. Laboratory experiments have resulted in mutagenic effects.
Fire Fighting MeasuresBack to Contents
【Flash Point】

72
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Disposal Code】

7
【Stability】

Stable at room temperature in closed containers under normal storage and handling conditions.
【Incompatibilities】

Strong bases, strong oxidizing agents, strong reducing agents.
【Decomposition】

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Transport InformationBack to Contents
【HS Code】

2932 99 95
Company Name: Zaozhuang star biotechnology limited
Tel: 0632-3759569 13589608009
Fax:
WebSite: www.jiuxingchemical.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: 3B Pharmachem (Wuhan) International Co.,Ltd.
Tel: 821-50328103-801 18930552037
Fax: 86-21-50328109
WebSite: https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: ChangShu Haitian Fine Chemicals Co.,Ltd
Tel: 13913622609
Fax: 86-512-52893680
WebSite: www.haitianchem.cn/
Company Name: Capot Chemical Co., Ltd
Tel: +86 (0) 571 85 58 67 18
Fax: 0086-571-85864795
WebSite: www.capotchem.com