ChemicalBook >>Methyl 3-methylthiopropionate>>Methyl 3-methylthiopropionate(13532-18-8)

Methyl 3-methylthiopropionate(13532-18-8)

Methyl 3-methylthiopropionate(13532-18-8)
Product IdentificationBack to Contents
【Product Name】

Methyl 3-methylthiopropionate
【Synonyms】

2-Methoxycarbonylethyl methyl sulfide
Methyl 3-methylsulfanylpropanoate
【CAS】

13532-18-8
【Formula】

C5H10O2S
【Molecular Weight】

134.19999999999999
【EINECS】

236-883-6
【Beilstein/Gmelin】

1745077
【Beilstein Reference】

4-03-00-00737
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear, colorless liquid. With a stench.
【Solubility in water】

Insoluble
【Boiling Point】

74
【Density】

1.075 g/cm3 (20 C)
【Vapor Density】

4.63
【Refractive Index】

1.4650 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
【Inhalation】

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

May cause irritation and dermatitis. May cause cyanosis of the extremities.
【Eyes】

May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
【EC Safety Phrase】

S 23 24/25
【UN (DOT)】

3334
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Fire Fighting MeasuresBack to Contents
【Flash Point】

72
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Disposal Code】

6
【Stability】

Stable under normal temperatures and pressures.
【Incompatibilities】

Strong oxidizing agents, strong bases.
【Decomposition】

Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide.
Transport InformationBack to Contents
【UN Number】

3334
【HS Code】

2930 90 70
Company Name: Tianjin Zhongxin Chemtech Co., Ltd.
Tel: 022-66880623
Fax: 86(0)22-66880086
WebSite: http://www.tjzxchem.com
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: 3B Pharmachem (Wuhan) International Co.,Ltd.
Tel: 821-50328103-801 18930552037
Fax: 86-21-50328109
WebSite: https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
Company Name: future industrial shanghai co., ltd
Tel: 400-0066400 13621662912
Fax: 021-55660885
WebSite: http://www.jonln.com
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18934348241
Fax: 010-89508210
WebSite: www.hwrkchemical.com/