ChemicalBook >>Zinc naphthenate>>Zinc naphthenate(12001-85-3)

Zinc naphthenate(12001-85-3)

Zinc naphthenate(12001-85-3)
Product IdentificationBack to Contents
【Product Name】

Zinc naphthenate

Naphthenic acid, zinc salt
Zinc naphthalene-2-carboxylate
Zinc uversol


【Molecular Weight】



【RTECS Class】

Agricultural Chemical and Pesticide; Mutagen; Reproductive Effector; Primary Irritant

Physical and Chemical PropertiesBack to Contents

Brown liquid.
【Boiling Point】

【Vapor Pressure】


1.01 g/cm3

Agricultural chemical, fungicide, bactericide, wood preservative.
First Aid MeasuresBack to Contents

Do not induce vomiting. This material is an aspiration hazard. If individual is drowsy or unconscious, place on left side with the head down. Seek medical attention. If possible, do not leave individual unattended.

If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.

Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention. Launder clothing before reuse.

If symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention.
Handling and StorageBack to Contents

Keep tightly closed in a cool place in a tightly closed container.

Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed.
Hazards IdentificationBack to Contents

Breathing of vapor or mist is possible. Breathing small amounts of this material during normal handling is not likely to cause harmful effects. Breathing large amounts may be harmful.

May cause mild skin irritation. Prolonged or repeated contact may dry the skin. Symptoms may include redness, buring, drying and cracking of skin, and skin burns.

Can cause eye irritation. Symptoms include stinging, tearing, redness, and swelling of eyes.

Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful. This material can enter the lungs during swallowing or vomiting and cause lung inflammation and/or damage.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

If workplace exposure limit(s) of product or any component is exceeded (See Exposure Guidelines), a NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirators (negative pressure type) under specified conditions.
【Exposure Effects】

Symptoms of Exposure stomach or intestinal upset (nausea, vomiting, diarrhea), irritation (nose, throat, airways), central nervous system depression (dizziness, drowsiness, weakness, fatigue, nausea, headache, unconsciousness), and death.
【Poison Class】

Fire Fighting MeasuresBack to Contents
【Flash Point】

【Fire Fighting】

Extinguish fire using regular foam, carbon dioxide, dry chemical. Wear a self-contained breathing apparatus with a full facepiece operated in the positive pressure demand mode with appropriate turn-out gear and chemical resistant personal protective equipment.
【Lower exp. limit】

【Fire Potential】

Vapors are heavier than air and may travel along the ground or be moved by ventilation and ignited by heat, pilot lights, other flames and ignition sources at locations distant from material handling point. Never use welding or cutting torch on or near drum (even empty) because product (even just residue) can ignite explosively.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Small Spill - Absorb liquid on vermiculite, floor absorbent, or other absorbent material and transfer to hood. Large Spill - Eliminate all ignition sources. Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Stop spill at source. Pump or vacuum transfer spilled product to clean containers for recovery. Absorb unrecoverable product. Transfer contaminated absorbent, soil and other materials to containers for disposal.
Stability and ReactivityBack to Contents


Strong oxidizing agents.

Carbon dioxide and carbon monoxide, various hydrocarbons.
Company Name:J & K SCIENTIFIC LTD.
Tel:400-666-7788 +86-10-82848833
Company Name:Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel:+86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-62670440(Beijing)
Fax:+86-(0)21-61259102(Shanghai) +86-(0)755-86170066(ShenZhen) +86-(0)10-88580358(Beijing)
Company Name:3B Pharmachem (Wuhan) International Co.,Ltd.
Tel:86-21-50328103 * 801、802、803、804 Mobile:18930552037
Company Name:Alfa Aesar
Tel:400-610-6006; 021-67582000
Company Name:TCI (Shanghai) Development Co., Ltd.
Tel:021-67121386 / 800-988-0390
Company Name:Energy Chemical
Tel:021-58432009 / 400-005-6266
Company Name:Shanghai Hanhong Scientific Co.,Ltd.
Company Name:Chengdu XiYa Chemical Technology Co., Ltd.