ChemicalBook >>Hexafluoropropylene oxide>>Hexafluoropropylene oxide(428-59-1)

Hexafluoropropylene oxide(428-59-1)

Hexafluoropropylene oxide(428-59-1)
Product IdentificationBack to Contents
【Product Name】

Hexafluoropropylene oxide
【Synonyms】

1,1-Epoxy-1,1,2,3,3,3-hexafluoropropane
1,2-Epoxyhexafluoropropane
2,2,3-Trifluoro-3-(trifluoromethyl)oxirane
Hexafluoro-1,2-epoxypropane
Propylene oxide hexafluoride
Trifluoro(trifluoromethyl)oxirane
【CAS】

428-59-1
【Formula】

C3F6O
【Molecular Weight】

166.02
【EINECS】

207-050-4
【RTECS】

TZ3400000
【Beilstein/Gmelin】

110835
【Beilstein Reference】

5-17-01-00020
Physical and Chemical PropertiesBack to Contents
【Appearance】

Hexafluoropropylene oxide is a colorless odorless gas.
【Solubility in water】

Insoluble
【Melting Point】

-129
【Boiling Point】

-28
【Vapor Pressure】

7100 (25 C)
【Partition Coefficient】

2.43
【Heat Of Vaporization】

20.5 kJ/mol
【Usage】

Monomer for hexafluoropropylene oxide polymers that are heat resistant to 410 deg c.
First Aid MeasuresBack to Contents
【Ingestion】

This compound is a gas, therefore inhalation is the first route of exposure.
【Inhalation】

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
【Skin】

CAUTION: Exposure of skin to compressed gases may result in freezing of the skin. Treatment for frostbite may be necessary. Remove the victim from the source of contamination. IMMEDIATELY wash affected areas gently with COLD water (and soap, if necessary) while removing and isolating all contaminated clothing. Dry carefully with clean, soft towels. If symptoms such as inflammation or irritation develop, IMMEDIATELY call a physician or go to a hospital for treatment.
【Eyes】

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Ingestion】

Unlikely to occur.
【Inhalation】

Vapors may cause dizziness or asphyxiation without warning.
【Skin】

Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite.
【Eyes】

See Skin.
【Hazards】

Containers may explode when heated. Ruptured cylinders may rocket.
【EC Risk Phrase】

R 36/37/38
【EC Safety Phrase】

S 23 26 36
【UN (DOT)】

1956
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Wear appropriate protective gloves, clothing and goggles.
【Respirators】

Wear positive pressure self-contained breathing apparatus (SCBA).
Fire Fighting MeasuresBack to Contents
【Flash Point】

-66
【Fire Fighting】

Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.
【Fire Potential】

May burn but does not ignite readily.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Attempt to stop leak if without undue personnel hazard.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Incompatibilities】

React with acids, bases, and oxidizing and reducing agents.
【Combustion Products】

Fire may produce irritating, corrosive and/or toxic gases.
Transport InformationBack to Contents
【UN Number】

1956
【Hazard Class】

2.2
Company Name:Shangfluoro
Tel:021-65170832-
Fax:
WebSite:www.shangfluoro.com
Company Name:J & K SCIENTIFIC LTD.
Tel:010-82848833- ;010-82848833-
Fax:86-10-82849933
WebSite:http://www.jkchemical.com
Company Name:Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel:21-61259100-
Fax:86-21-61259102
WebSite:http://www.meryer.com
Company Name:BeiJing Hwrk Chemicals Limted
Tel:0757-86329057-
Fax:0757-86311057
WebSite:www.hwrkchemical.com
Company Name:Energy Chemical
Tel:021-58432009-
Fax:021-58436166
WebSite:http://www.energy-chemical.com
Company Name:Wuhan Chemwish Technology Co., Ltd
Tel:86-027-67849912
Fax:86-027-87531808
WebSite:www.chemwish.com
Company Name:Shanghai Sinch Parmaceuticals Tech. Co. Ltd.
Tel:+86-21-54098501
Fax:+86-21-54096319
WebSite:www.sinch.com.cn
Company Name:shanghai science Bio-Pharmceutical.co,ltd.
Tel:0215-7872719-
Fax:02157872719
WebSite:www.freefluor.com