| Product Identification | Back to Contents | 【Product Name】
2-Nitrodiphenyl | 【Synonyms】
1-Nitro-2-phenylbenzene
2-Nitro-1,1'-biphenyl
2-Nitrobiphenyl | 【CAS】
86-00-0 | 【Formula】
C12H9NO2 | 【Molecular Weight】
199.21 | 【EINECS】
201-646-8 | 【RTECS】
DV5530000 | 【RTECS Class】
Agricultural Chemical and Pesticide; Mutagen | 【Merck】
12,6689 | 【Beilstein/Gmelin】
1818699 | 【Beilstein Reference】
4-05-00-01823 |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Gold to tan crystals or brown solid. | 【Solubility in water】
Insoluble | 【Melting Point】
36 | 【Boiling Point】
320 | 【Vapor Pressure】
0.00045 (25 C) | 【Density】
1.44 g/cm3 | 【Partition Coefficient】
3.52 | 【Heat Of Vaporization】
54.5 kJ/mol | 【Usage】
Plasticizer for resins, cellulose acetate and nitrate, polystyrenes. |
| First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Store in a cool, dry place. Store in a tightly closed container. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Ingestion】
Harmful if swallowed. | 【Inhalation】
Harmful if inhaled. May cause respiratory tract irritation. | 【Skin】
May cause skin irritation. Harmful if absorbed through the skin. | 【Eyes】
May cause irritation. |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Wear appropriate safety goggles, protective clothing and gloves. | 【Respirators】
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. | 【Poison Class】
4 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
151 | 【Autoignition】
180 | 【Fire Fighting】
Fires involving this compound can be controlled using a dry chemical, carbon dioxide or Halon extinguisher. | 【Fire Potential】
This compound is combustible. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. |
| Stability and Reactivity | Back to Contents | 【Incompatibilities】
If mixed with reducing agents, including hydrides, sulfides and nitrides, they may begin a vigorous reaction that culminates in a detonation. | 【Stability】
No data. |
|
| Company Name: |
Energy Chemical |
| Tel: |
021-021-58432009 400-005-6266 |
| Fax: |
021-58436166 |
| WebSite: |
http://www.energy-chemical.com |
| Company Name: |
China Langchem Inc. |
| Tel: |
0086-21-58956006 |
| Fax: |
0086-21-58956100 |
| WebSite: |
www.chemicalbook.com/ShowSupplierProductsList19141/0.htm |
| Company Name: |
Maya High Purity Chemicals |
| Tel: |
+86 (573) 82222445 (0)18006601000 452520369 |
| Fax: |
+86 (573) 82222643 |
| WebSite: |
www.chemicalbook.com/ShowSupplierProductsList15221/0.htm |
|