ChemicalBook >>Sodium selenate>>Disodium selenate(13410-01-0)

Disodium selenate(13410-01-0)

Disodium selenate(13410-01-0)
Product IdentificationBack to Contents
【Product Name】

Disodium selenate
【Synonyms】

Disodium selenate
【CAS】

13410-01-0
【Formula】

Na2O4Se
【Molecular Weight】

188.93
【EINECS】

236-501-8
【RTECS】

VS6650000
【RTECS Class】

Agricultural Chemical and Pesticide; Tumorigen; Mutagen; Reproductive Effector; Human Data
【Merck】

12,8820
【Beilstein/Gmelin】

533054 (G)
Physical and Chemical PropertiesBack to Contents
【Appearance】

Colorless rhombic crystals.
【Density】

3.098 g/cm3 (20 C)
【Usage】

Insecticide in some horticultural applications.
First Aid MeasuresBack to Contents
【Ingestion】

Do not induce emesis. Activated charcoal: administer charcoal as a slurry (240 ml water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents.
【Inhalation】

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
【Skin】

Remove and isolate contaminated clothing and shoes. Remove material from skin immediately. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
【Eyes】

Immediately flush with running water for at least 20 minutes.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Inhalation】

Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Effects of contact or inhalation may be delayed.
【Skin】

Selenium compounds may cause dermatitis. Selenite toxicity may include facial flushing.
【Eyes】

See Inhalation.
【Ingestion】

Effects include nausea, vomiting, salivation, and gastrointestinal pain. A garlic odor on the breath may occur. Acute ingestion of sodium selenate caused a garlic odor of the breath and diarrhea.
【Hazards】

Fire may produce irritating or poisonous gas. Emits toxic selenium and sodium oxide fumes when heated to decomposition. Avoid decomposing heat.
【UN (DOT)】

3283
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Wear appropriate protective gloves, clothing and goggles.
【Respirators】

Wear positive pressure self-contained breathing apparatus (SCBA).
【Exposure Effects】

Dizziness, CNS depression, restlessness, sluggish pupillary reflexes, clouding of the sensorium, and coma have all been noted with selenium toxicity. Selenite toxicity may include a lightheaded sensation. Inhalation of selenium dusts can cause headache. Acute ingestion of sodium selenate by an adolescent caused irritability. Selenium readily crosses the placenta; maternal and fetal levels are similar at term.
【Exposure limit(s)】

OSHA: PEL (8 h TWA): 0.2 mg/m3.
【Poison Class】

1
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Stay upwind; keep out of low areas. Wear self-contained (positive pressure if available) breathing apparatus and full protective clothing.Extinguish fire with dry chemical, carbon dioxide, water spray, fog, or foam. Move container from fire area if it can be done without risk.
【Fire Potential】

Non-Combustible
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Avoid breathing dust. Keep unnecessary people away; isolate hazard area and deny entry. Stay upwind; keep out of low areas. Do not touch spilled material; stop leak if you can do so without risk. Small spills: absorb with sand or other noncombustible absorbent material and place into containers for later disposal. Small dry spills: with clean shovel place material into clean, dry container and cover; move containers from spill area. Large spills: dike far ahead of spill for later disposal.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Combustion Products】

Fire may produce irritating, corrosive and/or toxic gases.
Transport InformationBack to Contents
【UN Number】

3283
【Hazard Class】

6.1
【Packing Group】

I; II; III