ChemicalBook >>Polyoxyethylene stearate>>PEG monostearate(9004-99-3)

PEG monostearate(9004-99-3)

PEG monostearate(9004-99-3)
Product IdentificationBack to Contents
【Product Name】

PEG monostearate
【Synonyms】

17-Hydroxy-3,6,9,12,15-pentaoxaheptadec-1-yl octadecanoate
Akyporox s 100
Arosurf 1855e40
Cerasynt m
Cerasynt mn
Cithrol 10ms
【CAS】

9004-99-3
【Formula】

(C2H4O)n . C18H36O2
【RTECS】

TQ5950000
【RTECS Class】

Other
【Beilstein/Gmelin】

NA
Physical and Chemical PropertiesBack to Contents
【Appearance】

Cream-colored soft, waxy or pasty solid @ 25 deg c. Faint fatty odor.
【Density】

1.03 g/cm3 (20 C)
【Usage】

Surfactant.
First Aid MeasuresBack to Contents
【Ingestion】

Even though a substance may be considered non-toxic for the amount ingested or packaged, it should not be considered as non-toxic in any amounts. Even ingestions of various foodstuffs can cause adverse symptoms if large amounts are eaten (green apples, garlic, onion). The most important fact to remember is to treat the patient not the poison, especially when the diagnosis is unknown. Knowing that the product is listed as non-toxic helps avoid overtreating the patient or being over zealous in getting a patient to professional medical care. If there is a question of simultaneous ingestion of a product which may be more dangerous, the management on the more toxic agent should be consulted.
【Inhalation】

Although inhalation of common dust may not be considered toxic, it is certainly a hazard if there is inhalation of too many particles. Individuals should be removed from exposure to too high a concentration of even relatively non-toxic substances.
【Skin】

Foreign materials spilled on the skin may not represent a toxic or irritation hazard in small quantities, but may produce adverse effects if applied in large quantities or if used over a significant period of time. Whenever possible, foreign materials should be removed from the skin with simple washing. Should skin irritation or erythema occur, a patient may wish to seek medical assistance.
【Eyes】

Foreign materials in the eye may not cause a toxic reaction, but injury from a foreign body may occur. In such cases, the patient should be observed for eye irritation and should seek medical assistance if the irritation becomes significant.
Handling and StorageBack to Contents
【Storage】

Keep tightly closed in a cool place in a tightly closed container.
【Handling】

Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed.
Hazards IdentificationBack to Contents
【Ingestion】

Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful.
【Inhalation】

No data available.
【Skin】

May cause mild skin irritation. Symptoms may include redness and burning of skin.
【Eyes】

Can cause eye irritation. Symptoms include stinging, tearing, redness, and swelling of eyes.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Wear resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Not required under normal usage conditions.
【Poison Class】

-
Fire Fighting MeasuresBack to Contents
【Flash Point】

221
【Fire Fighting】

Extinguish fire using regular foam, water fog, carbon dioxide, dry chemical. Water or foam may cause frothing which can be violent and possibly endanger the life of the firefighter. Wear a self-contained breathing apparatus with a full facepiece operated in the positive pressure demand mode with appropriate turn-out gear and chemical resistant personal protective equipment.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Small Spill - Sweep up material for disposal or recovery. Large Spill - Shovel material into containers. Thoroughly sweep area of spill to clean up any residual material.
Stability and ReactivityBack to Contents
【Stability】

Stable.
【Incompatibilities】

Strong alkalies, strong acids and strong oxidizing agents.
【Decomposition】

Oxides of carbon.
Company Name: SHANGHAI BANGCHENG CHEMICAL Co.,Ltd.
Tel: 021-69106960 13701823733
Fax: 021-69106780
WebSite: www.bangchengchem.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: JinYan Chemicals(ShangHai) Co.,Ltd.
Tel: 13817811078
Fax: 86-021-50426522,50426273
WebSite: www.jingyan-chemical.com
Company Name: Adamas Reagent, Ltd.
Tel: 400-6009262 16621234537
Fax: 021-64823266
WebSite: www.tansoole.com
Company Name: Shandong Xiya Chemical Co., Ltd
Tel: 13355009207 13355009207
Fax: 0539-6365991
WebSite: www.xiyashiji.com