ChemicalBook >>1-Methyl-2-pyrrolidineethanol>>1-Methyl-2-pyrrolidineethanol(67004-64-2)

1-Methyl-2-pyrrolidineethanol(67004-64-2)

1-Methyl-2-pyrrolidineethanol(67004-64-2)
Product IdentificationBack to Contents
【Product Name】

1-Methyl-2-pyrrolidineethanol
【Synonyms】

2-(1-Methylpyrrolidin-2-yl)ethanol
2-Pyrrolidineethanol, 1-methyl-
【CAS】

67004-64-2
【Formula】

C7H15NO
【Molecular Weight】

129.19999999999999
【EINECS】

266-538-5
【Beilstein/Gmelin】

103441
【Beilstein Reference】

5-21-01-00115
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear yellow to brown liquid.
【Boiling Point】

110
【Density】

0.95 g/cm3
【Vapor Density】

4.46
【Refractive Index】

1.4726 (18 C)
First Aid MeasuresBack to Contents
【Ingestion】

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

May cause respiratory tract irritation. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

Causes skin irritation. May cause cyanosis of the extremities.
【Eyes】

Causes severe eye irritation and possible injury. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】

Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed.
Fire Fighting MeasuresBack to Contents
【Flash Point】

84
【Autoignition】

240
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Stability】

Stable under normal temperatures and pressures. Stable at room temperature in closed containers under normal storage and handling conditions.
【Incompatibilities】

Strong oxidizing agents, strong acids.
【Decomposition】

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Company Name: Shandong Chuancheng Pharmaceutical Co. Ltd
Tel: 0635-5032777 17606225562
Fax:
WebSite: www.sdccph.com/
Company Name: Beijing Leaderherb Bio-Tech. Co., LTD.
Tel: 010-51288246
Fax:
WebSite: www.leaderherb.com
Company Name: Hangzhou Yijing Technology Co., Ltd
Tel: 15068777134
Fax:
WebSite: www.yijingbio.com
Company Name: Qingdao Ruifengyuan Chemical Co., Ltd.
Tel: 13375559818 13375559818
Fax:
WebSite: http://www.qdruifengyuan.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Chembest Research Laboratories Limited
Tel: 021-20908456
Fax: 021-58180499
WebSite: http://www.BioChemBest.com
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/