| Product Identification | Back to Contents | 【Product Name】
3-Pyridinecarboxaldehyde | 【Synonyms】
3-Formylpyridine
3-Pyridylcarboxaldehyde
Nicotinaldehyde
Nicotinic aldehyde
Pyridine-3-carbaldehyde
Rowalind | 【CAS】
500-22-1 | 【Formula】
C6H5NO | 【Molecular Weight】
107.11 | 【EINECS】
207-900-4 | 【RTECS】
QS2980000 | 【RTECS Class】
Other | 【Beilstein/Gmelin】
105343 | 【Beilstein Reference】
5-21-07-00334 | 【EC Class】
irritant |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Clear yellow liquid. | 【Solubility in water】
Soluble | 【Melting Point】
7 | 【Boiling Point】
209 | 【Vapor Pressure】
0.2 (25 C) | 【Density】
1.1415 g/cm3 (20 C) | 【pKa/pKb】
3.3 (pKb) | 【Partition Coefficient】
.57 | 【Heat Of Vaporization】
44.6 kJ/mol | 【Refractive Index】
1.5437 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | 【Skin】
Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | 【Eyes】
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. | 【Handling】
Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. |
| Hazards Identification | Back to Contents | 【Ingestion】
The toxicological properties of this substance have not been fully investigated. | 【Inhalation】
The toxicological properties of this substance have not been fully investigated. | 【Skin】
No information regarding skin irritation and other potential effects was found. | 【Eyes】
No information regarding eye irritation and other potential effects was found. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. | 【EC Risk Phrase】
R 34 42/43 | 【EC Safety Phrase】
S 23 26 28 36/37/39 45 | 【UN (DOT)】
1993 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
60 | 【Autoignition】
317 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Will be easily ignited by heat, sparks or flame. Containers may explode when heated. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam. Do NOT use straight streams of water. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. For small fires, use carbon dioxide, dry chemical, dry sand, or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out. | 【Fire Potential】
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces. |
| Stability and Reactivity | Back to Contents | 【Disposal Code】
3 | 【Stability】
Stable under normal shipping and handling conditions. | 【Incompatibilities】
Strong oxidizing agents. | 【Decomposition】
Nitrogen oxides, carbon monoxide, carbon dioxide. | 【Combustion Products】
Fire may produce irritating, corrosive and/or toxic gases. |
|
|