| Product Identification | Back to Contents | 【Product Name】
Tin fluoroborate | 【Synonyms】
Borate(1-), tetrafluoro-, tin(2+) (2:1)
Tin bis(tetrafluoroborate) | 【CAS】
13814-97-6 | 【Formula】
B2F8Sn | 【Molecular Weight】
292.29000000000002 | 【EINECS】
237-487-6 | 【Beilstein/Gmelin】
38135 (G) |
| First Aid Measures | Back to Contents | 【Ingestion】
Seek immediate medical attention. Do not induce vomiting. Vomiting will cause further damage to the mouth and throat. If individual is conscious and alert, immediately rinse mouth with water and give milk or water to drink. If possible, do not leave individual unattended. | 【Inhalation】
If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention. | 【Skin】
Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention. Launder clothing before reuse. | 【Eyes】
If symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention. |
| Handling and Storage | Back to Contents | 【Storage】
Keep tightly closed in a cool place in a tightly closed container. | 【Handling】
Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. |
| Hazards Identification | Back to Contents | 【Inhalation】
It is possible to breathe this material under certain conditions of handling and use (for example, during heating, spraying, or stirring). Breathing this material may be harmful or fatal. Symptoms may include severe irritation and burns to the nose, throat, and respiratory tract. | 【Skin】
Can cause permanent skin damage. Symptoms may include redness, burning, and swelling of skin, burns, and other skin damage. Passage of this material into the body through the skin is possible, but it is unlikely that this would result in harmful effects during safe handling and use. Skin absorption of this material (or a component) may be increased through injured skin. | 【Eyes】
Can cause permanent eye injury. Symptoms include stinging, tearing, redness, and swelling of eyes. Can injure the cornea and cause blindness. | 【Ingestion】
Swallowing this material may be harmful or fatal. Symptoms may include severe stomach and intestinal irritation (nausea, vomiting, diarrhea), abdominal pain, and vomiting of blood. Swallowing this material may cause burns and destroy tissue in the mouth, throat, and digestive tract. Low blood pressure and shock may occur as a result of severe tissue injury. |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | 【Respirators】
If workplace exposure limit(s) of product or any component is exceeded (see exposure guidelines), a NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirators (negative pressure type) under specified conditions. | 【Exposure Effects】
Repeated, prolonged overexposure to inorganic fluoride compounds may result in increased bone density, fluorosis, digestive disturbances, loss of weight, anemia, and diseases of the teeth. Overexposure to this material (or its components) has been suggested as a cause of the following effects in laboratory animals: testis damage. |
| Fire Fighting Measures | Back to Contents | 【Fire Fighting】
Extinguish using media most appropriate for surrounding fire. Wear a self-contained breathing apparatus with a full facepiece operated in the positive pressure demand mode with appropriate turn-out gear and chemical resistant personal protective equipment. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Small Spill - Absorb liquid on vermiculite, floor absorbent or other absorbent material. Persons not wearing proper personal protective equipment should be excluded from area of spill. Large Spill - Eliminate all ignition sources. Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Stop spill at source. Pump or vacuum transfer spilled product to clean containers for recovery. Absorb unrecoverable product. Transfer contaminated absorbent, soil and other materials to containers for disposal |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
| Company Name: |
Alfa Aesar |
| Tel: |
400-6106006 |
| Fax: |
021-67582001/03/05 |
| WebSite: |
http://chemicals.thermofisher.cn |
| Company Name: |
Adamas Reagent, Ltd. |
| Tel: |
400-6009262 16621234537 |
| Fax: |
021-64823266 |
| WebSite: |
www.tansoole.com |
|