ChemicalBook >>Pigment Yellow 12>>Pigment Yellow 13(5102-83-0)

Pigment Yellow 13(5102-83-0)

Pigment Yellow 13(5102-83-0)
Product IdentificationBack to Contents
【Product Name】

Pigment Yellow 13

Benzidene Yellow
C.I. Pigment Yellow 12
Helioyellow GW
Rangoon Yellow


【Molecular Weight】



【RTECS Class】

Tumorigen; Mutagen

Physical and Chemical PropertiesBack to Contents

Odorless fine yellow powder.
【Solubility in water】

【Melting Point】

【Vapor Pressure】

6E-26 (25 C)

1.22 g/cm3 (20 C)
【Partition Coefficient】

【Heat Of Vaporization】


Printing inks and lacquers giving good heat resistance, high tinctorial strength and high transparency, stoving lacquers and inks for wrappers, tinplate printing and wallpaper. In rubber, pvc, uf and pf resins as fastness to rubber curing and to solvents is superior to that of ci pigment yellow 1. Paper, textile printing, linoleum.
First Aid MeasuresBack to Contents

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. If symptoms (such as redness or irritation) develop, immediately transport the victim to a hospital.
Handling and StorageBack to Contents

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
【Exposure Effects】

The toxicological properties of this material have not been investigated.
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
【Fire Potential】

This material is probably combustible.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents

Incompatible with strong oxidizing agents.

No data.
Company Name: Winchem Industrial Co. Ltd
Tel: 0574-83851061
Fax: 86-574-87083209
Company Name: Shanghai BeiZhuo Biotech Co., Ltd.
Tel: 021-61119791/13386096464
Fax: 021-50190009
Company Name: Shanghai JONLN Reagent Co., Ltd.
Tel: 400-0066400 13621662912
Fax: 021-55660885
Company Name: Chengdu HuaXia Chemical Reagent Co. Ltd
Tel: 400-1166196 13458535857
Fax: QQ:800101999
Company Name: Hubei Jusheng Technology Co.,Ltd
Tel: 027-59599241 18871490274
Fax: 027-59599241
Company Name: Alta Scientific Co., Ltd.
Tel: 022-022-65378550
Fax: 022-2532-9655
Company Name: Boen pharm
Tel: 86 512-62572107 62962707
Fax: 86 512-62922078
Company Name: Grader reagent
Tel: 18221735425