| Product Identification | Back to Contents | 【Product Name】
Fenaminosulf | 【Synonyms】
Sodium 4-dimethylaminobenzenediazosulfonate
Sodium N-(4-dimethylaminophenyl)iminosulfamate | 【CAS】
140-56-7 | 【Formula】
C8H11N3NaO3S | 【Molecular Weight】
252.24 | 【EINECS】
205-419-4 | 【RTECS】
CZ1750000 | 【RTECS Class】
Agricultural Chemical and Pesticide; Tumorigen; Mutagen; Reproductive Effector | 【Beilstein/Gmelin】
3921950 | 【Beilstein Reference】
3-16-00-00381 | 【EC Index Number】
611-003-00-7 | 【EC Class】
Toxic; Harmful; Dangerous for the Environment |
| First Aid Measures | Back to Contents | 【Ingestion】
If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. MMEDIATELY transport the victim to a hospital. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Aqueous solution is sensitive to light, stabilized by sodium sulfite, and is stable in alkaline media. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Ingestion】
See inhalation. | 【Inhalation】
Symptoms of exposure to this compound may include lethargy, tremors, convulsions, hypoglycemia and death. | 【Skin】
See inhalation. | 【Eyes】
See inhalation |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | 【Respirators】
Wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter). | 【Poison Class】
3 |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. |
|
|