ChemicalBook >>1-(Dimethylamino)tetradecane>>1-(Dimethylamino)tetradecane(112-75-4)

1-(Dimethylamino)tetradecane(112-75-4)

1-(Dimethylamino)tetradecane(112-75-4)
Product IdentificationBack to Contents
【Product Name】

1-(Dimethylamino)tetradecane
【Synonyms】

Armeen dm 14d
Dimethylmyristamine
Dimethylmyristylamine
Dimethyltetradecylamine
N,N-Dimethylmyristylamine
N,N-Dimethyltetradecylamine
【CAS】

112-75-4
【Formula】

C16H35N
【Molecular Weight】

241.46
【EINECS】

204-002-4
【Beilstein/Gmelin】

1748246
【Beilstein Reference】

3-04-00-00419
Physical and Chemical PropertiesBack to Contents
【Appearance】

A light yellow liquid with a fishlike odor.
【Boiling Point】

105 - 110 (0.1 torr)
【Usage】

Cationic detergent, corrosion inhibitor.
First Aid MeasuresBack to Contents
【Ingestion】

Do not induce emesis - dilution: following ingestion and/or prior to gastric evacuation, immediately dilute with 4 to 8 ounces (120 to 240 ml) of milk or water (not to exceed 15 ml/kg in a child). The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation.
【Inhalation】

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
【Skin】

Remove contaminated clothing, wash exposed area with copious amounts of water. A physician should examine the area if irritation or pain persists.
【Eyes】

Eye exposure results in mild discomfort (0.1 Percent solution) to very serious corneal damage (1 to 10 percent solution) depending on the concentration. Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Inhalation】

Respiratory muscle paralysis, pulmonary edema, occupational asthma, and hypoxemia have been reported.
【Skin】

Dermal necrosis has resulted from exposure to cetrimonium bromide in concentrations ranging from 2 to 17.5 Percent. A number of these agents have caused irritant or allergic contact dermatitis.
【Ingestion】

Vomiting, diarrhea and abdominal pain may occur. Ingestion of concentrated solutions may produce burns of the mouth, pharynx, and esophagus. Hemorrhagic gi tract necrosis and peritonitis have been reported.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Exposure Effects】

CNS depression progressing to coma, seizures, shock, and respiratory muscle paralysis has been reported.
【Poison Class】

3
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Apply water spray or mist to knock down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses.
Stability and ReactivityBack to Contents
【Stability】

Acid-stable.
【Incompatibilities】

Incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides.
Company Name: Shanghai Boyun New Material Co., LTD
Tel: 13862233611
Fax:
WebSite: http://www.boyunchem.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Shanghai Hanhong Scientific Co.,Ltd.
Tel: 021-54306202 13764082696;
Fax:
WebSite: https://www.hanhongsci.com
Company Name: Chemsky(shanghai)International Co.,Ltd.
Tel: 021-50135380
Fax:
WebSite: www.shchemsky.com
Company Name: Shandong Xiya Chemical Co., Ltd
Tel: 13355009207 13355009207
Fax: 0539-6365991
WebSite: www.xiyashiji.com
Company Name: Syntechem Co.,Ltd
Tel:
Fax: E-Mail Inquiry
WebSite: www.syntechem.com