ChemicalBook >>2-Ethylhexyloxypropylamine>>2-Ethylhexyloxypropylamine(5397-31-9)

2-Ethylhexyloxypropylamine(5397-31-9)

2-Ethylhexyloxypropylamine(5397-31-9)
Product IdentificationBack to Contents
【Product Name】

2-Ethylhexyloxypropylamine
【Synonyms】

1-Propanamine, 3-((2-ethylhexyl)oxy)-
2-Ethylhexyl-3-aminopropyl ether
2-Ethylhexyloxypropylamine
3-(2-Ethylhexoxy)propylamine
3-(2-Ethylhexyloxy)propylamine
PA 12EH
【CAS】

5397-31-9
【Formula】

C5H14N2
【Molecular Weight】

102.17
【EINECS】

226-420-6
【RTECS】

UI2820000
【RTECS Class】

Other
【Beilstein/Gmelin】

1740535
【Beilstein Reference】

4-04-00-01625
Physical and Chemical PropertiesBack to Contents
【Appearance】

Colorless liquid.
【Solubility in water】

Soluble
【Boiling Point】

235
【Density】

0.8493 g/cm3 (20 C)
【pKa/pKb】

4.24 (pKa)
【Refractive Index】

1.4388 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
【Inhalation】

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
【Skin】

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
【Eyes】

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection.
【Exposure Effects】

The toxicological properties of this material have not been investigated.
【Poison Class】

3
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Fires involving this material can be controlled by using a carbon dioxide, dry chemical, or Halon extinguisher.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents
【Incompatibilities】

Incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides.
【Stability】

No data.
Hazards IdentificationBack to Contents
【Hazards】

Flash point for this compound is >93 C (>200 F).
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18934348241
Fax: 010-89508210
WebSite: www.hwrkchemical.com/
Company Name: Shanghai Hanhong Scientific Co.,Ltd.
Tel: 021-54306202 13764082696;
Fax:
WebSite: https://www.hanhongsci.com
Company Name: Shandong Xiya Chemical Co., Ltd
Tel: 13355009207 13355009207
Fax: 0539-6365991
WebSite: www.xiyashiji.com
Company Name: Syntechem Co.,Ltd
Tel:
Fax: E-Mail Inquiry
WebSite: www.syntechem.com