ChemicalBook >>2,6-Dimethyl-2-heptanol>>2,6-Dimethyl-2-heptanol(13254-34-7)

2,6-Dimethyl-2-heptanol(13254-34-7)

2,6-Dimethyl-2-heptanol(13254-34-7)
Product IdentificationBack to Contents
【Product Name】

2,6-Dimethyl-2-heptanol
【Synonyms】

2,6-Dimethylheptan-2-ol
Dimetol
Freesiol
Lolitol
【CAS】

13254-34-7
【Formula】

C9H20O
【Molecular Weight】

144.25
【EINECS】

236-244-1
【RTECS】

MJ3324950
【RTECS Class】

Primary Irritant
【Beilstein/Gmelin】

1733525
【Beilstein Reference】

2-01-00-00457
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear, colorless liquid. Alcohol-like odor.
【Melting Point】

-10
【Boiling Point】

180
【Density】

0.8162 g/cm3 (11 C)
【Vapor Density】

4.97
【Refractive Index】

1.426
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
【Handling】

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

Causes skin irritation. May cause cyanosis of the extremities.
【Eyes】

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】

Effects may be delayed.
Fire Fighting MeasuresBack to Contents
【Flash Point】

63
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and ReactivityBack to Contents
【Stability】

Stable at room temperature in closed containers under normal storage and handling conditions.
【Incompatibilities】

Strong oxidizing agents.
【Decomposition】

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Beijing Donghualituo Techonlogy Development Co.,Ltd.
Tel: 010-88425576
Fax: (+86)-10-88425546
WebSite: www.dhltchem.com
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Adamas Reagent, Ltd.
Tel: 400-6009262 16621234537
Fax: 021-64823266
WebSite: www.tansoole.com
Company Name: jiliang chemicals
Tel: 21-62165282 15801962796;
Fax: 021 61153784
WebSite: http://www.jiliangchem.com
Company Name: Beijing Isomersyn Technology CO;LTD
Tel: 010-82954736 13391601435
Fax:
WebSite: www.chemicalbook.com/supplier/10680452/1.htm
Company Name: Shandong Xiya Chemical Co., Ltd
Tel: 13355009207 13355009207
Fax: 0539-6365991
WebSite: www.xiyashiji.com