| Product Identification | Back to Contents | 【Product Name】
1-Methyl-4-piperidinol | 【Synonyms】
1-Methylpiperidin-4-ol
4-Hydroxy-N-Methylpiperidine | 【CAS】
106-52-5 | 【Formula】
C6H13NO | 【Molecular Weight】
115.18 | 【EINECS】
203-406-8 | 【Beilstein/Gmelin】
103024 | 【Beilstein Reference】
5-21-01-00052 | 【EC Class】
irritant |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Yellow viscous liquid. | 【Solubility in water】
Very soluble | 【Melting Point】
29 - 31 | 【Boiling Point】
200 | 【Vapor Pressure】
0.08 (25 C) | 【pKa/pKb】
4.85 (pKb) | 【Partition Coefficient】
-.52 | 【Heat Of Vaporization】
50.8 kJ/mol | 【Vapor Density】
4 | 【Refractive Index】
1.4775 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | 【Skin】
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | 【Eyes】
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture. Store under an inert atmosphere. | 【Handling】
Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam. |
| Hazards Identification | Back to Contents | 【Ingestion】
Causes gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. | 【Inhalation】
Causes respiratory tract irritation. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. | 【Skin】
Causes skin irritation. | 【Eyes】
Causes eye irritation. | 【EC Risk Phrase】
R 36/37/38 | 【EC Safety Phrase】
S 26 36 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
87 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Place under an inert atmosphere. Do not get water inside containers. |
| Stability and Reactivity | Back to Contents | 【Disposal Code】
3 | 【Stability】
Stable at room temperature in closed containers under normal storage and handling conditions. | 【Incompatibilities】
Strong acids, strong bases, strong oxidizing agents, strong reducing agents. | 【Decomposition】
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide. |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
| Company Name: |
Alfa Aesar |
| Tel: |
400-6106006 |
| Fax: |
021-67582001/03/05 |
| WebSite: |
http://chemicals.thermofisher.cn |
|