Product Identification | Back to Contents | 【Product Name】
Hexamethylcyclotrisiloxane | 【Synonyms】
2,2,4,4,6,6-Hexamethyl-1,3,5,2,4,6-trioxatrisilinane Cyclotrisiloxane, hexamethyl Dimethylsiloxane cyclic trimer Hexamethyltrisiloxane LS 8120 SDK 10 | 【CAS】
541-05-9 | 【Formula】
C6H18O3Si3 | 【Molecular Weight】
222.46 | 【EINECS】
208-765-4 | 【Beilstein/Gmelin】
5676485 |
Physical and Chemical Properties | Back to Contents | 【Appearance】
Colorless to white crystals. | 【Solubility in water】
May decompose. | 【Melting Point】
64.5 | 【Boiling Point】
134 | 【Vapor Pressure】
4.2 (24 C) | 【Density】
1.12 g/cm3 (20C) | 【Partition Coefficient】
4.47 | 【Heat Of Vaporization】
39.8 kJ/mol | 【Heat Of Combustion】
-5891 kJ/mol | 【Vapor Density】
8 |
First Aid Measures | Back to Contents | 【Ingestion】
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | 【Inhalation】
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. | 【Skin】
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | 【Eyes】
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. |
Handling and Storage | Back to Contents | 【Storage】
Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from water. Store protected from moisture. | 【Handling】
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not allow contact with water. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam. |
Hazards Identification | Back to Contents | 【Inhalation】
The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest. | 【Skin】
May cause irritation and dermatitis. May cause cyanosis of the extremities. | 【Eyes】
May cause eye irritation. May cause chemical conjunctivitis and corneal damage. | 【Ingestion】
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Ingestion of large amounts may cause CNS depression. | 【Hazards】
Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Do NOT use water directly on fire. | 【EC Risk Phrase】
R 11 | 【EC Safety Phrase】
S 16 22 24/25 | 【UN (DOT)】
1325 |
Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | 【Exposure Effects】
Effects may be delayed. |
Fire Fighting Measures | Back to Contents | 【Flash Point】
32 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Do NOT use water directly on fire. Use water spray to cool fire-exposed containers. Do NOT get water inside containers. | 【Lower exp. limit】
1.1 | 【Fire Potential】
Flammable/combustible material. May be ignited by friction, heat, sparks or flames. |
Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers. |
Stability and Reactivity | Back to Contents | 【Incompatibilities】
Moisture. | 【Stability】
Stable under normal temperatures and pressures. | 【Decomposition】
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, silicon oxide. | 【Combustion Products】
Fire may produce irritating and/or toxic gases. |
|
Company Name: |
Hubei Baidu Chemical Co., Ltd |
Tel: |
13627137652 |
Fax: |
027-59223020 |
WebSite: |
www.chemicalbook.com/showsupplierproductslist329110/0.htm |
Company Name: |
Shanghai TBBMed Co.,Ltd |
Tel: |
021-50498136 13564881053 |
Fax: |
021-50498136 |
WebSite: |
http://www.tbbmed.com |
Company Name: |
J & K SCIENTIFIC LTD. |
Tel: |
010-82848833 400-666-7788 |
Fax: |
86-10-82849933 |
WebSite: |
http://www.jkchemical.com |
|